Bellfires VENTO CLASSIC SMALL Installation Instructions & Manual For Maintenance page 48

Bellfi res
Once the logs have been positioned, replace the glass in the appliance, following the
instructions in chapter 4: DISMANTLING / ASSEMBLING THE GLASS, THE
REGULATOR AND BURNER.
1.7.7 Mounting fl ue gas restriction plate
Depending on the length and shape of the concentric fl ue system and the chimney
construction, you should, if indicated, fi t a restriction plate with a certain width (B) into
the ceiling of the combustion chamber.
To do this, see the set-up options as listed in fi gure 4 through 10.
Important: Ensure that the correct fl ue gas restriction plate is mounted.
Use of the correct fl ue gas restriction plate will provide
optimum effi ciency, fl ame effect and combustion. Mounting
an incorrect fl ue gas restriction plate can result in damage
to the gas fi re.
Assembly
restriction
plate
Figure 21: Positioning restriction plate
48
English
Installation instructions