Bellfires VENTO CLASSIC SMALL Installation Instructions & Manual For Maintenance page 47

Bellfi res
PROPANE APPLIANCE:
1. Carefully remove the embers (1x 125 gram) from the packaging and place them
evenly on and around the burner (not on the holes!).
Please make sure that all burner orifi ces (small holes) are kept unblocked!
Note ! Small embers and their residue should not be scattered
on the burner. This can cause a blockage on the burner
orifi ces.
2. Place the logs around the burner: see fi gure 20.
Don't place any logs on the burner !
Keep the burner orifi ces unblocked!
Figure 20: Log set Vento Classic Small
Position propane/butane burner
Installation instructions
Do not block the pilot light
Embers must not be placed next
to the pilot light burner
English
PROPANE:
Keep the burner
orifi ces unblocked
47