Bellfires VENTO CLASSIC SMALL Installation Instructions & Manual For Maintenance page 43

Bellfi res
The brickwork or the fi re-resistant sheet construction can now be continued to ceiling
height.
If using other materials, such as stone or heat-resistant plating, you should follow the
supplier's instructions.
Once the fi replace has been fi nished, you can now, fi t the frame with the small door to
the operating unit.
After installation in a new fi replace and/or applying new cement work, the
appliance cannot be used for at least four weeks.
1.7.4 Checking the gas connection
After connection of the gas supply, check that all connections are completely gas tight
using soapy water or a leak tester.
1.7.5 Decorative walls and grill
The appliance is supplied standard with a set of decorative walls and a grill. These are
made of a fragile fi re-resistant material.
Place the pieces carefully in the order 1 to 5 as shown in fi gure 18.
Note ! : The decorative walls and the grill are made of
a fragile fi reproof material. Place carefully !!!
Wear protective clothing to prevent possible
allergic reactions.
Figure 18: Fitting decorative walls and grill
Installation instructions
English
43