Led Display Only Displays Part Of The Image; Signal Needs To Scale; No Display In The Second Half Part Of Led Display; Resolution Is Insufficient - RGBlink VSP 516S User Manual

LED Display Only Displays Part of the Image

Signal Needs to Scale

Press【SCALE】button in the processor and knob to adjust the actual
screen size of the screen, combined with button 【POSITION】 , including the
"width", "height" and "starting position", remember to touch the knob to
confirm.

No Display in the Second Half Part of LED Display

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the
resolution to be bigger than screen width by button 【MENU】under
OUTPUT RES, and touch knob to confirm.

Sending Card Can not Take Lower Part

TS 802 can control the max horizontal resolution 2048, and vertical
resolution 640. Each CAT5 output is 320 pixels.

Left Screen Appears Two Black Sides

Adjust DE Deviation

This phenomenon needs to adjust the DVI output and DE migration of the
processor, through the 【MENU】 to find "OUTPUT" and find the
corresponding output name, such as "DVI1 OUT ADJUST", and find "DVI1
DE" again, make an adjustment for corresponding horizontal and vertical
DE, please remember to save to the corresponding channel after setting up,
save to SAVE1 by default.
VSP 516S User Manual 123