1. Manuals
  2. Brands
  3. RGBlink Manuals
  4. DVD Player
  5. VSP 516S
  6. User manual

RGBlink VSP 516S User Manual

Hide thumbs Also See for VSP 516S:
Table of Contents

Advertisement

Quick Links

Download this manual
VSP 516S

User Manual

 Manual #: RGB-RD-UM-V516S E001
 Revision: V1.3
VSP 516S
User Manual
1

Advertisement

Table of Contents
loading

Related Manuals for RGBlink VSP 516S

Summary of Contents for RGBlink VSP 516S

  • Page 1: User Manual

    VSP 516S User Manual  Manual #: RGB-RD-UM-V516S E001  Revision: V1.3 VSP 516S User Manual...
  • Page 2 Technology Co.,LTD. No part can be copied, reproduced or translated without permission. Notice RGBlink provides this manual ―as is‖ without warranty of any kind, no matter expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. RGBlink may make improvements or changes to the products and the programs described in this publication at any time without notice.
  • Page 3 30 days after the transfer of risks. In the event of justified notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract.
  • Page 4 Company Address Xiamen RGBlink Science & Technology Co., Ltd. S603~604 Weiye Building Torch Hi-Tech Industrial Headquarter: Development Zone Xiamen, Fujian Province, P.R.C Shenzhen office: Floor 11, A1 Building, Baiwang R&D Building, Shahe West Road, Xili Town, Nanshan District, Shenzhen, Guangdong Province, P.R.C Room 602, Building 7, CaiManJie, No.67 Chaoyang...

  • Page 5: Power Source

    To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating characteristics. Refer fuse replacement to qualified service personnel. Do Not Operate in Explosive Atmospheres To avoid explosion, do not operate this product in an explosive atmosphere. VSP 516S User Manual...
  • Page 6 Highlights an essential operating procedure, condition or statement. CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. VSP 516S User Manual...
  • Page 7 4. Add ―How to Set Up the Playlist‖. 5. Add ―How to Achieve Multiple Cascade‖. 6. Add ―Common Questions and Solutions‖ items. 7.Add ―Installing an Optional SDI Input Board‖. V1.3 2014-06-04 0003# 1. Update the test pattern description Vira in ―Menu Orientation‖. VSP 516S User Manual...

  • Page 8: Table Of Contents

    System Overview ................25 Application Questions ................. 26 2. Hardware Orientation ..............27 In This Chapter ................. 27 VSP 516S Back Panel ..............28 CONT Interface ..................28 2. Dial Switch .................... 28 3. 10/100M UDP Interface ..............28 4. USB Interface ..................28 5.
  • Page 9 2. Dial Switch .................... 32 3. 10/100M UDP Interface ..............32 4. USB Interface ..................32 5. RS232 Interface ................... 32 INPUT Interface ..................33 1：3G SDI Input ..................33 17：Displayport Input ................33 18~20：CVBS Input ................33 VSP 516S User Manual...
  • Page 10 28：DVI Output ..................34 29：DVI +VGA DVI Output ..............34 Switch and Power ..................35 16.30：Power Interface and Switch ............. 35 VSP 516S Front Panel ..............36 LCD Panel ....................38 Signal Keys ....................38 Function Keys ................... 39 3. Hardware Installation ..............42 In This Chapter .................
  • Page 11 MENU --- FACTORY RESET ..............58 5. Communication Software Guideline ........59 In This Chapter ................. 59 Software Installation ................. 60 Software Operation ................64 Connection ....................64 Use ......................67 File Toolbar ....................67 Communication Toolbar ................70 VSP 516S User Manual...
  • Page 12 How to Connect Upper Monitor by LAN Interface? ...... 81 How to Connect Upper Monitor by RS232 Interface? ....83 How to Connect Upper Monitor by USB Interface? ...... 86 6. System Setup and Operations ..........90 VSP 516S User Manual...
  • Page 13 How to Set Up the Playlist ............. 112 How to Save the Parameter ............115 How to Load the Saved Parameter ..........116 How to Achieve Multiple Cascade ..........117 7. Common Questions and Solutions ........121 In This Chapter ................121 VSP 516S User Manual...
  • Page 14 Spottted Image or Freeze When Switch CV Signal ....124 Normal Phenomenon ................124 If DP Port Can Connect DVI or HDMI Signal ......125 DP Port Can Only Connect DP Signal ..........125 A. Specification ................126 B. Contact Information ..............129 VSP 516S User Manual...
  • Page 15 C. Software Upgrade ..............130 IP Software Download Instruction ..........130 Mainboard Program Upgrade ............132 Installing an Optional SDI Input Board ......... 135 VSP 516S User Manual...

  • Page 16: Brief Introduction

    Brief Introduction This chapter is designed to introduce you to the VSP 516S User Manual. Areas to be covered are:  Chapter Structure  How to Use The Manual  Terms and Definitions  System Overview  Application Questions VSP 516S...

  • Page 17: Chapter Structure

    1. Brief Introduction Chapter Structure Chapter Structure The following chapters provide instructions for all aspects of VSP 516S operations. Chapter 1 Brief Introduction Chapter 2 Hardware Orientation Chapter 3 Hardware Installation Chapter 4 Menu Orientation Chapter 5 Communication Software Guideline...

  • Page 18: How To Use The Manual

     For system setup and operations, refer to Chapter 6, ―System Setup and Operations‖ on page 90. Should you have any questions regarding the installation or operation of VSP 516S, please consult with the factory. Refer to Appendix B on page 129 for contact information. VSP 516S...

  • Page 19: Term And Definitions

    Telecommunications Wiring Standard.  “Color bars”: A standard test pattern of several basic colors (white, yellow, cyan, green, magenta, red, blue, and black) as a reference for system alignment and testing. In NTSC video, the most commonly VSP 516S User Manual...
  • Page 20  “Frame”: In interlaced video, a frame is one complete picture. A video frame is made up of two fields, or two sets of interlaced lines. In a film, a frame is one still picture of a series that makes up a motion picture. VSP 516S User Manual...
  • Page 21 For this reason, the hue control is not needed on a PAL TV set. PAL, in many transmission forms, is widely used in Western Europe, Australia, Africa, the Middle East, and Micronesia. PAL uses 625-line, VSP 516S User Manual...
  • Page 22 This is a 10-bit, scrambled, polarity independent interface with common scrambling for both component ITU-R 601 and composite digital video and four channels of (embedded) digital audio.  “Seamless Switching”: A feature found on many video switchers. This VSP 516S User Manual...
  • Page 23 31.5 kHz and vertical frequency of 70 Hz (Mode 1, 2) and 60 Hz (Mode 3). The signal is non-interlaced in modes 1, 2, and 3 and interlaced when using the 8514/A card (35.5 kHz, 86 Hz) in mode 4. It VSP 516S User Manual...
  • Page 24 640×480 with a color palette of 16 bits and 256,000 colors.  “YCrCb”: Used to describe the color space for interlaced component video.  “YPbPr”: Used to describe the color space for progressive-scan (non-interlaced) component video. VSP 516S User Manual...

  • Page 25: System Overview

    AVDSP Series use the latest patent of video processing technical for the high image display and Any in Any out switch. It can accept all kinds of video signals including CVBS、S-Video、YCbCr、YPbPr、RGBHV（VGA） 、 DVI-D、HDMI、3G SDI and DP (Displayport). VSP 516S User Manual...

  • Page 26: Application Questions

    1. Brief Introduction Application Questions Application Questions RGBlink offers solutions to demand technical problems. Any application questions, or required further information, please contact with our Customer Support Engineers. Refer to Appendix B for contact details. VSP 516S User Manual...

  • Page 27: Hardware Orientation

    Hardware Orientation In This Chapter This chapter provides detailed information about the VSP 516S hardware. The following topics are discussed:  VSP 516S Back Panel  VSP 516S Front Panel VSP 516S User Manual...

  • Page 28: Vsp 516S Back Panel

    VSP 516S Back Panel VSP 516S Back Panel At present there are 2 versions of back panel. The figure below illustrates the professional interface and control signals of VSP 516S back panel V.1. INTERFACE INTERFACE 3G SDI input BNC CVBS port 25...

  • Page 29: Rs232 Interface

    2. Hardware Orientation VSP 516S Back Panel 5. RS232 Interface It is used to connect the computer. INPUT Interface It includes 1 SDI input, 3 CVBS (BNC port), 1 S-video, 1 DVI-I(compatible with the HDMI input), 1 VGA (DB15port), 1 Displayport, 3 YPbPr, 10 Audio Input.

  • Page 30: 29：Ypbpr Input

    2. Hardware Orientation VSP 516S Back Panel Note DVI-I is compatible with HDMI. 27~29：YPbPr Input R/Pr G/Y B/Pb BNC, used to support SD/HD analog video input, up to 1080p60; 30：VGA Input VGA Interface input the video signal from HD player and Computer, etc.

  • Page 31: Switch And Power

    2. Hardware Orientation VSP 516S Back Panel which has DVI interface. （This DVI connector does not support hot-plugging）. DVI +VGA, VGA output connector can be connected to monitor or projector which has VGA interface. Note adapter, can connect with DVI-based or VGA-based equipment, and via DVI to VGA adapter, can output VGA only.

  • Page 32: Cont Interface

    2. Hardware Orientation VSP 516S Back Panel The figure below illustrates the professional interface and control signals of VSP 516S back panel V.2. INTERFACE INTERFACE 3G SDI input BNC CVBS port 18~20 CVBS Input BNC port Dial the code switch S-Video DIN 4 3.6.7.11.12...

  • Page 33: Input Interface

    S-Video DIN 4, used to input S-Video signal (PAL, NTSC, SECAM compatible). 22：DVI Input DVI input interface: Input the video signal from computer, DVI signal generator. Connect to the same DVI interface on VSP 516S; （This Connection does not support hot-plugging） Note DVI-I is compatible with HDMI.

  • Page 34: Output

    2. Hardware Orientation VSP 516S Back Panel VGA Interface input the video signal from HD player and Computer, etc. compatible with YPbPr signal, input signal via the DB15 interface. OUTPUT 6.7.11.12: 10/100M Interface RJ45 Gigabit copper port, used to connect LED screen.

  • Page 35: Switch And Power

    2. Hardware Orientation VSP 516S Back Panel Note adapter, can connect with DVI-based or VGA-based equipment, and via DVI to VGA adapter, can output VGA only. Switch and Power 16.30：Power Interface and Switch AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface...

  • Page 36: Vsp 516S Front Panel

    Insert power cord and push power to ON position. LCD module on the front panel will show RGBLINK and go into self verification before it load last setting and send processed image to the target monitor. For the first setup, CV1 input is default source.
  • Page 37 2. Hardware Orientation VSP 516S Front Panel System into the Circulation Statement: Cycle process displays the current input signal source, the current output format, the current program version information, the current equipment serial number; the user hold equipment serial number will get more effective service and support.

  • Page 38: Lcd Panel

    2. Hardware Orientation VSP 516S Front Panel VSP 516S front panel is as following： LCD Panel Used to show button menu and menus for interactive communication； Signal Keys CV1 input selection Button, its LED light turns on, output will be switched to this channel;...

  • Page 39: Function Keys

    2. Hardware Orientation VSP 516S Front Panel Function Keys Push to exit from current choice item; Push to confirm the current choice item; Push to select up items in LCD menu; Push to select down in LCD menu; Push to select the left items Push to select the right items Switch to amplify the audio;...
  • Page 40 2. Hardware Orientation VSP 516S Front Panel Switch to use the user-defined mode 2; Switch to use the user-defined mode 3; Switch to select full screen or zoom view, just for single picture mode; Switch to select aspect ratio 4:3 or 16:9;...
  • Page 41 Reset button. Note AB in VSP 516S doesn't support Fade-In-Out. Push to go to between scalezoomcropscale mode； Push to adjust the brightness and the contrast ratio, push to enter to the relevant Menu, and then push the UP and DOWN to adjust the brightness and the contrast ratio.

  • Page 42: Hardware Installation

    Hardware Installation In This Chapter This chapter provides comprehensive installation instruction for VSP 516S hardware: Following is the size of VSP 516S for your reference. VSP 516S User Manual...

  • Page 43: Safety Precautions

    Unpacking and Inspection Before opening VSP 516S process shipping box, inspect it for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents against the packing slip.

  • Page 44: Menu Orientation

    Menu Orientation In This Chapter This chapter describes all VSP 516S processor menus, including how they are accessed, the functions that are available, and descriptions of each menu tree (in block diagram format). The following topics are discussed: • MENU ...

  • Page 45: Menu

    Press the MENU to main menu, main menu as shown below. Press knob buttons to select left or right menu item. ―>‖ before the menu means it’s in selected state. Press knob button to enter corresponding setting or view the menu. VSP 516S User Manual...
  • Page 46 4. Menu Orientation MENU VSP 516S User Manual...

  • Page 47: Menu

    INPUT DETAIL: Display input signal information, including CV1, CV2, CV3, SVIDEO, DVI, YPbPr, VGA, SDI. ZOOM ADJUST: It can adjust the position and the scale, as following: H SIZE: Width setting. V SIZE: Height setting. H Pos: Horizontal phase setting. VSP 516S User Manual...

  • Page 48: Menu

    OUTPUT DETAIL: Display output signal information, including DV1, DV2, OUT FORMAT: Mainly display the current output signal and output resolution. Users can choose different output formats through the LEFT/RIGHT button, this option includes 20 common output resolutions, shown as follow: VSP 516S User Manual...
  • Page 49 DVI1. SCALE：Scale menu as following: H SIZE: Width setting. V SIZE: Height setting. H Pos: Horizontal phase setting. V Pos: Vertical phase setting. RESET: If quality image distorts by mistake in improper operation, it can be VSP 516S User Manual...
  • Page 50 PICTURE: Picture setting, the sub-menu as following: BRIGHTNESS: It can change the image color BRIGHTNESS via BRIGHTNESS Settings. CONTRAST: It can change the image color CONTRAST via CONTRAST settings. SATURATION: It can change the image color SATURATION via SATURATION Settings. VSP 516S User Manual...
  • Page 51 PBP L+R PBP T+B SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the main and sub-picture exchange. ALPHA: Can set the image display transparency, regulating range between 0 - 16. VSP 516S User Manual...
  • Page 52 Mode 2: Graphic content is controlled by double-picture transparency, the background is completely transparent; BLEND LEVEL: Can set the image display transparency, regulating range between 0 - 16. ABOVE/BELOW: VSP 516S User Manual...
  • Page 53 The FRE button can also fulfill this setting. TEST PATTERN: Test pattern setting, press LEFT/RIGHT button, there are 1-66 kinds of modes for choose. Notice: When the input comes from DVI, Displayport (DP), VGA, or SDI VSP 516S User Manual...

  • Page 54: Menu

    POP R+T: Upper right corner pop up PUSH R+T: Upper right corner push POP L+B: Lower left corner pop up PUSH L+B: Lower left corner push POP R+B: Lower right corner pop up PUSH R+B: Lower right corner push VSP 516S User Manual...
  • Page 55 FADE TIME: Switch time setting. Press UP/DOWN button to choose the time and press SEL to confirm. The switching time ranges from 0 to1.0. VSP 516S User Manual...

  • Page 56: Menu

    V TOTAL: Vertical total. H SIZE: Width setting. V SIZE: Height setting. H POS: Horizontal phase setting. V POS: Vertical phase setting. MENU --- SAVE SETUP SAVE TO: The device provides three save modes, users can save the VSP 516S User Manual...

  • Page 57: Menu

    SYSTEM INFO: System information. MCU VER: Information of MCU version. VIDEO VER: Information of VIDEO version. SN: It is the Factory serial number of VSP 516S which is used to search the information of VSP 516S. IP: IP address. TECH SUPPORT: SALES HOTLINE.

  • Page 58: Menu

    MENU --- FACTORY RESET Enter FACTORY RESET to reset the IP; choose YES and press the SEL button to confirm; then VSP 516S is reset to its factory settings. After 5 seconds, it completes factory settings and is ready for more operations.

  • Page 59: Communication Software Guideline

    The following topics are discussed:  Software Installation  Software Operation  How to Connect Upper Monitor by LAN Interface?  How to Connect Upper Monitor by RS232 Interface?  How to Connect Upper Monitor by USB Interface? VSP 516S User Manual...

  • Page 60: Software Installation

    Also it can be customized with schedule function. Double click to install, English version default for use, click ―select‖ to next dialog: And in next dialog is the user agreement of the software, click Agree to go VSP 516S User Manual...
  • Page 61 5. Communication Software Guideline Software Installation User can select ―Change‖ to choose the VSP 516S install software: VSP 516S User Manual...
  • Page 62 5. Communication Software Guideline Software Installation Click ―Next‖ to go on： Click ―Next‖ to go on： VSP 516S User Manual...
  • Page 63 5. Communication Software Guideline Software Installation Click ―Next‖ to go on: Click ―Finish‖ and ready to run VSP 516S console: VSP 516S User Manual...

  • Page 64: Software Operation

    5. Communication Software Guideline Software Operation Software Operation Install communication which comes with the package of VSP 516S device. Double click icon from home screen to run the software. Double click icon from home screen to run the software. VSP 516S communication software interface as shown：...
  • Page 65 COM1. Confirm used COM and open control software, click 【communication】 page，enter setup option，Serial is the default COM，click icon refresh COM number，choose available COM，default Baud rate is115200. After serial setting, click icon，the icon becomes when VSP 516S User Manual...
  • Page 66 RS 232 COM line can upgrade 100M program, while USB can’t. Ethernet ， user can fill any number less than 1023 in local port， the remote port must be 192.168.0.100 and the remote port must be 1000. After VSP 516S User Manual...

  • Page 67: Use

    File Toolbar ：Open script. User can open saved script and alter its parameters. ： Save script. Save current user parameters as script to the prescribed path. ：Import template. There are six templates for user. Users can setup VSP 516S User Manual...
  • Page 68 If user choose open device when start, user can use last run, use script file or none when user start. User can click to choose which script user want to open. If user choose execute schedule when start, the next dialogue will display when software run. VSP 516S User Manual...
  • Page 69 5. Communication Software Guideline Software Operation ：Language: The software supports Chinese, English and German version. The picture following is the English dialogue. VSP 516S User Manual...

  • Page 70: Communication Toolbar

    5. Communication Software Guideline Software Operation The picture following is the German dialogue. ：Exit Communication Toolbar ：Open COM. ：Close COM ：Set COM. Device Toolbar ：Synchronization. ：Save to flash. VSP 516S User Manual...
  • Page 71 ：Advance Note Advance is only done by engineer. Please connect us for password. ： Audio patterns, can choose audio input source for IMAGE A or IMAGE B. Note Same as MENU AUDIO AUDIO IN. VGA adjustment. VSP 516S User Manual...

  • Page 72: Schedule Toolbar

    5. Communication Software Guideline Software Operation Note Same as MENU INPUT ADJUST. Schedule Toolbar ：Customize schedule ：Execute schedule. Execute tasks according to schedule. VSP 516S User Manual...

  • Page 73: Help Toolbar

    ：Help: Display helps dialogue； ：About: Display information of software； Output Resolution Toolbar User can choose different output resolution by selecting from pull down list. VSP 516S has 20 output resolutions for users selection. Note Same as MENU OUTPUT FORMAT OUT or OUT key.

  • Page 74: Aspect Ratio Toolbar

    VGA, green toolbar says it has chosen the current interface for channel 1 input interface, the default last single channel chosen interface for channel 2 input interface, the currently selected channel will be shown on the right side of the source. VSP 516S User Manual...

  • Page 75: Screen Parameter Toolbar

    Display toolbar Users can set Alpha value of ―dynamic Video‖ and ―static current frame‖ through display toolbar. When it is in dynamic Video, the video plays properly; when it is in static current frame, the video stop playing. VSP 516S User Manual...

  • Page 76: Output Image Setup Toolbar

    Setting Gamma is generally not recommended, since LED large screen itself has Gamma function. For further information, users can contact with our customer service team. Note Same as MENU OUTPUT GAMMA Output Image Setup Toolbar User can customize the brightness and the contrast. VSP 516S User Manual...

  • Page 77: Images Display Toolbar

    Users can recall the saved user mode1, mode2 or mode3 Log Toolbar User can save or delete the operate log file. Information Toolbar It is the VSP 516S software version, core board version, firmware version and the serial number in bottom of the software interface. 【Video Processor】Options VSP 516S...
  • Page 78 Split function, choose ―ON‖ can set H total, V total, H position, V position, H size and V size. Note Same as MENU SPLIT. Layout: Through the layout of the user can set a variety of double-picture mode. VSP 516S User Manual...
  • Page 79 5. Communication Software Guideline Software Operation Device Schedule: Users can set up VSP 516S to play the appointed input video automatically in time and operation of single or dual channels, ratio place. Users can setup up to 10 timing operation in the schedule.

  • Page 80: Help】Options

    5. Communication Software Guideline Software Operation Audio setting： 【Help】Options Version: the update of software About: the information of the software version and the company VSP 516S User Manual...

  • Page 81: How To Connect Upper Monitor By Lan Interface

    Connect VSP 516S and computer with cable, the connection diagram is as follows: Power on VSP 516S, start the network function, specific steps are as follows: MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and check the IP address of the equipment, confirm if it is consistent with the computer, such as 192.168.0.***, take 192.168.0.100 for example.
  • Page 82 【Comm】 icon in the Click lower-right corner of the control software interface is green, and log outputs information smoothly, then it can control the device through PC software. VSP 516S User Manual...

  • Page 83: How To Connect Upper Monitor By Rs232 Interface

    Take out the RS 232 cable as following（RS-232, with 9-pin on one end， RJ 11 on the other side）. Connect one side of the RJ11 download line to the RS232 on the video processor VSP 516S, and the other side to be connected to the serial port on the PC.
  • Page 84 Click【Device Manager】―+‖ on the left，check the COM number，as following， COM1 is offered. Remember the COM you are using and then run the control software, find 【Communication】option. In default，first time user have to click button, as following: VSP 516S User Manual...
  • Page 85 How to Connect Upper Monitor by RS232 Interface? Check and tap【Serial】 ，Serial Port , for example, is COM6 which is checked from device manager. Set VSP 516S Boud Rate to be :115200， Click【Confirm】after setting. 【open serial】 ，check if 【COM】icon is on the bottom right Click corner，when there is the prompt green...

  • Page 86: How To Connect Upper Monitor By Usb Interface

    Connect the USB cable to the PC and the video processor. Turn on the VSP 516S, for the first time to use USB, the PC will remind finding the new hardware and ask to install the driver for this new driver: Install from the list or specified location, press ―NEXT‖:...
  • Page 87 5. Communication Software Control Guide How to Connect Upper Monitor by USB Interface? When the installation finish, can go to check the installed COM port inside the device management, as following picture shows: VSP 516S User Manual...
  • Page 88 How to Connect Upper Monitor by USB Interface? Install the console software, and run after install, shows the interface of the console as following: Select the COM as installed just now, and set the VSP 516S Boud Rate to be: 115200. VSP 516S...
  • Page 89 VSP 516S. VSP 516S User Manual...

  • Page 90: System Setup And Operations

    How to Realize the Freeze and the Live Image Switching  How to Set Up the Volume  How to Set Up the Playlist  How to Save the Parameter  How to Load the Saved Parameter  How to Achieve Multiple Cascade VSP 516S User Manual...

  • Page 91: Interface And Input Signal Option

    6. System Setup and Operations Interface and Input Signal Option Interface and Input Signal Option VSP 516S Back Panel V.1: INTERFACE INTERFACE 3G SDI input BNC CVBS port 25 S-Video DIN 4 Dial the code switch DVI Input DVI-I 3.16.17...
  • Page 92 HDMI output or DVD HDMI output; YPbPr（BNC Port）Can support DVD player, video signal. Through the BNC × 3 this equipment component interface, as the Pb, Y, Pr, VGA （DB15 Port） Can support HD player, computer, video signal. Through VSP 516S User Manual...
  • Page 93 SDI （ BNC Port） Can receive video signal from HD player, and HD camera, connect interface 20 via 75 ohms BNC port. Connect LED screens via network cable. 34. Power：Power has been already supplied for video processor 35. AEC Port：AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface. VSP 516S User Manual...
  • Page 94 6. System Setup and Operations Interface and Input Signal Option VSP 516S back panel V.2. INTERFACE INTERFACE 3G SDI input BNC CVBS port 18~20 CVBS Input BNC port Dial the code switch S-Video DIN 4 3.6.7.11.12 10/100M Interface RJ45 DVI Input DVI-I 4.9.14...
  • Page 95 YPbPr（BNC Port）Can support DVD player, video signal. Through the BNC × 3 this equipment component interface, as the Pb, Y, Pr, VGA （DB15 Port） Can support HD player, computer, video signal. Through the DB9 interface input signal. VSP 516S User Manual...
  • Page 96 HD player, and HD camera, connect interface 20 via 75 ohms BNC port. Connect LED screens via network cable. 16. Power：Power has been already supplied for video processor 30. AEC Port：AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface. VSP 516S User Manual...

  • Page 97: How To Confirm The Device Is In Normal Operation

    2. After power on , the fans running , the button scanning 3. After the button scanned, the device operate, the LCD display that： RGBLINK 视诚科技 亮彩系列 AVDSP SeriesVSP 516S Wait Init Device… INPUT:CV1 NO INPUT Output Format: 1920x1080x60 SV: 0.42 SN: 3138 IP ADDRESS 192.168.0.100 VSP 516S User Manual...
  • Page 98 IP ADDRESS INPUT:CV1 192.168.0.100 NO INPUT Output Format: SV: 0.42 1920x1080x60 SN: 3138 5. System into the circulation state of equipment for the normal starting. VSP 516S User Manual...

  • Page 99: How To Choose The Language On The Lcd

    4. Press UP/DOWN button or LEFT/RIGHT button, change the default ―ENGLISH‖ to ―Chinese‖. *LANG 语言 中文 5. After finishing, press SEL button to confirm, the LCD display ―ENGLISH‖ has been changes to ―Chinese‖. >LANG 语言 中文 VSP 516S User Manual...

  • Page 100: How To Adjust The Output Resolution

    OUTPUT FORMAT: >1920x1080x60 2. Press UP/DOWN button or LEFT/RIGHT button，choose the required resolution. for example: 2048x1152x60; OUTPUT FORMAT: *2048x1152x60 3. Press SEL button, finish the choice of resolution. OUTPUT FORMAT: >2048x1152x60 Note Same as MENU OUTPUT FORMAT VSP 516S User Manual...

  • Page 101: How To Realize Single Image Switching

    (input signal source by original CV1 switching to DVI).The same method can be switched CV2, CV3, SVID, YPbPr, VGA, SDI. Note Seamless switch: means signal switch will not appear any flash point, black, shaking or delay VSP 516S User Manual...

  • Page 102: How To Set Up The Size And Position Of The Single Image

    4. Press SEL button，enter 【SCALE】option，through UP/DOWN button, after finished, press SEL confirm. >H SIZE 1920 V SIZE 1080 >H POS V POS 5. If the operation wrong，or want to factory resetting, enter 【SCALE】 option, choose ―RESET‖ to recover factory RESET. >RESET VSP 516S User Manual...

  • Page 103: How To Set Up The Pip

    Boot the system default for single image output, if users need to set to double-picture, the light touch I/II key, LCD screen display as follows: >PIP >SWAP IMAGE 【PIP】option is ON，open the PIP mode。 Note Same as MENU OUTPUT ON/OFF. VSP 516S User Manual...

  • Page 104: How To Choose The Signal Source In Pip

    4. Press AB button，the KEY light off ，can re-choose the main signal: SELECT IMAGE A Note Main screen and Sprite can choose the same input signal source, namely the master screen can show the same picture. VSP 516S User Manual...

  • Page 105: How To Set Up The Size And Position Of Pip

    Lord alone setting image size and position, method and Sprite set consistent; Note Can also via MENU OUTPUT SCALE to set H SIZE,V SIZE,H POS,V POS. VSP 516S User Manual...
  • Page 106 6. System Setup and Operation How to Set up the Size and Position of PIP 4. Through the above steps, can complete the master picture image size and position setting. VSP 516S User Manual...

  • Page 107: How To Set Up The Layout Of Pip

    1.Under PIP mode，press I/II button ； >PIP >SWAP IMAGE 2.Through UP/DOWN button, choose LAYOUT option ， press SEL to confirm： *LAYOUT PIP L+T ALPHA 3.Through UP/DOWN button， Choose three PIP LAYOUT, effects were into below: PIP L+T PBP L+R PBP T+B VSP 516S User Manual...

  • Page 108: How To Realize The Screen Parameter And Full Screen Switching

    3. SCREEN setup is completed, in the 【SCREEN】 【 MODE 】 to choose the option inside the SCREEN SIZE SCREEN and or FULL SIZE, can be realized in SCREEN print switching. Note The【FS】button can also fulfill this setting. VSP 516S User Manual...

  • Page 109: How To Realize The Brightness Adjusting

    1.Press MENU button，though UP/DOWN button，choose【INTPUT】to enter： >INPUT OUTPUT CONTRAST >BRIGHTNESS 2.Through UP/DOWN button, enter 【BRIGHTNESS】option，press SEL button to confirm, through UP/DOWN button to adjust the value BRIGHTNESS. Note The 【BRT】 button can also fulfill this setting. VSP 516S User Manual...

  • Page 110: How To Realize The Freeze And Live Image Switching

    2. Press FRE button again，the current freeze image is switched live image: LIVE IMAGE Note Can choose FREEZE IMAGE or LIVE VIDEO via MENU OUTPUT DISPLAY MODE MODE Note Under the PIP mode, the main screen at the same time be frozen or live. VSP 516S User Manual...

  • Page 111: How To Set Up The Volume

    AUDIO IN choose IMAGE A or IMAGE B input source，finish it. Other settings and single screen mode is consistent, repeat the steps can be 1 to 3. >AUDIO IMAGE A HDMI INTERNAL Note The 【MSA】button can also switch the audio channel VSP 516S User Manual...

  • Page 112: How To Set Up The Playlist

    How to Set Up the Playlist How to Set Up the Playlist Users can set up VSP 516S in ―Device Schedule‖ in PC software to play the appointed input video automatically in appointed time and operation of single or dual channels, also can set up the ratio and position.
  • Page 113 6. If need to get certain timing content, input the timer index, and click the get icon to see the specific content. For example: choose timer index 2, show the interface as follows: VSP 516S User Manual...
  • Page 114 6. System Setup and Operation How to Set Up the Playlist 7. The software default "Device Schedule" function close, user should click on icon to realize automatically play. VSP 516S User Manual...

  • Page 115: How To Save The Parameter

    How to Save the Parameter How to Save the Parameter Save user mode to the customer for different scene directly call; leave out the edit operation inconvenience, VSP 516S provides three save preferences. 1. Press SAVE button, the key lights, the SAVE function open.

  • Page 116: How To Load The Saved Parameter

    How to Load the Saved Parameter How to Load the Saved Parameter Save user mode to the customer for different scene directly call; leave out the edit operation inconvenience, VSP 516S provides three save preferences; 1. Press MENU button. 2. Through UP/DOWN button, choose SAVE SETUP option: SYSTEM >SAVE SETUP...

  • Page 117: How To Achieve Multiple Cascade

    Here, we will illustrate the operation. For example, the LED display is 2400 * 1024, and now we will cascade with 2 VSP 516S, specific steps are as follows: 1. Connection and Setting (1) Connect the DVI signal to DVI interface of the two VSP 516S through DVI distributor (DXP 0108).
  • Page 118 6. System Setup and Operation How to Achieve Multiple Cascade the second VSP 516S for 1248*1024. (2) Choose【SPLIT】 option of the first VSP 516S through MENU button, rotate the knob to choose 【*SPLIT】 option, confirm and choose 【ON】, and start SPLIT function.
  • Page 119 VSP 516S). Set the horizontal position 【〉H POS】 for 1152 (The horizontal position of VSP 516S, that is the screen width of the first VSP 516S). Set the vertical position 【〉V POS】 for (The vertical position of VSP 516S, that is horizontal split, so the vertical value is unchanged).
  • Page 120 6. System Setup and Operation How to Achieve Multiple Cascade VSP 516S User Manual...

  • Page 121: Common Questions And Solutions

    Left Screen Appears Two Black Sides  All Key Lights Light on Simultaneously  Color Abnormal When Input SDI Signal  Spotted Image or Freeze When Switch CV Signal  If DP Port Can Connect DVI or HDMI Signal VSP 516S User Manual...

  • Page 122: No Output In Led Display

    If display normally shows and no flash point, please check whether DVI outlets put tight or replace to DVI line of sending card. If display flashes point, please judge if input signal, wire, and interface are normal. VSP 516S User Manual...

  • Page 123: Led Display Only Displays Part Of The Image

    "DVI1 OUT ADJUST", and find "DVI1 DE" again, make an adjustment for corresponding horizontal and vertical DE, please remember to save to the corresponding channel after setting up, save to SAVE1 by default. VSP 516S User Manual...

  • Page 124: All Key Lights Light On Simultaneously

    Color Abnormal When Input SDI Signal Adjust SDI Input Settings The VSP 516S may appear color abnormal when input SDI signal, it needs adjust the SDI input setting, specific operations are as follows: Press "MENU" key and select "INPUT" option, select "SDI ADJUST"...

  • Page 125: If Dp Port Can Connect Dvi Or Hdmi Signal

    DP Port Can Only Connect DP Signal DP port can only connect DP signal, please choose graphics card with DP output port. If need 2 DVI or HDMI, you can choose HDMI to DP, SDI, VGA converter for signal switching. VSP 516S User Manual...

  • Page 126: Specification

    Number of Outputs Connector Standard DVI-I socket SMPTE ： 625/25 PAL, 525/29.97 NTSC, 625/50p PAL, Supported Resolution 525/59.94p NTSC 1080i50,1080i59.94/60,720p50,720p59.94/60 VESA：800×600×60Hz，1024×768×60Hz，1280×768×60Hz， 1280×1024×60Hz ， 1600×1200×60Hz ， 1920×1080×60Hz ， 1920×1080×50Hz Signal Level TMDS pwl, single pixel input,165MHz bandwidth VSP 516S User Manual...
  • Page 127 Standard DB15 Socket Supported Resolution VESA: 800×600×60Hz, 1024×768×60Hz, 1024×768×75Hz, 1280×720×60Hz, 1280×720×50Hz, 1280×768×60Hz, 1280×800×60Hz, 1280×1024×60Hz, 1360×768×60Hz, 1366×768×60Hz, 1400×1050×60Hz, 1440×900×60Hz, 1600×1200×60Hz, 1680×1050×60Hz, 1920×1080×60Hz, 1920×1080×50Hz, 1920×1200×60Hz, 2048×1152×60Hz, 2560×812×60Hz, 2560×816×60Hz Signal Level R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75 ohm VSP 516S User Manual...
  • Page 128 Support PIP、PBP for any two inputs Audio sync switch support Extras Communication RS232 USB TCP/IP Power Supply 85-264V 2.1A IEC-3 Working Environment 0° C~45° C Stored Environment 10% to 90% Product Warranty 3-year parts and labor warranty VSP 516S User Manual...

  • Page 129: Contact Information

    All video products are designed and tested to the highest quality standard and backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related...

  • Page 130: Software Upgrade

    Firstly, users can choose the right serial port, set the Boud rate to 9600, choose LPC2368, and to load the aim document (hex file) for IP board upgrading; Secondly, tick the item below to confirm. Finally, click the ―start‖ button. VSP 516S User Manual...
  • Page 131 After download, exit the program, turn off the power, tack the two coding switch back, as below restart the equipment power, check if the equipment work normally. Note Flash Magic download website: http://www.flashmagictool.com/download.html&d =FlashMagic.exe VSP 516S User Manual...

  • Page 132: Mainboard Program Upgrade

    Mainboard Program Upgrade Mainboard program is upgraded via webpage, specific steps are as follows: 1. Connect VSP 516S and computer with cable. 2. Start the network function, specific steps are as follows: MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and check the IP address of the equipment, confirm if it is consistent with the computer, such as 192.168.0.***, take 192.168.0.100 for example.
  • Page 133 UPDATE FIREWARE... 7. If display "UPDATE SUCCESS! PLEASE RESTART!‖ UPDATE SUCCESS！ PLEASE RESTART！ Or display "Video Fireware Update Success!" on webpage, it means the program is loaded successfully, otherwise, it needs to reload. VSP 516S User Manual...
  • Page 134 8. Restart the device and check the running state, then end the mainboard program update. VSP 516S User Manual...

  • Page 135: Installing An Optional Sdi Input Board

    3. Closing the Processor Part 1: Open the Processor Specific steps are as follows: 1. Disconnect the AC power cord from the VSP 516S to remove power from the unit. Warning: To prevent electric shock, always unplug the VSP 516S from the AC power source before opening the enclosure.
  • Page 136 6. Perform the desired maintenance procedure. See ―Installing an Optional SDI Input Board‖ in Part 2. Part 2: Installing an Optional SDI Input Board Install an optional SDI input board in the VSP 516S as follows: Warning: Changes to electronic components must be performed by authorized service personnel only.
  • Page 137 (Figure 3) VSP 516S User Manual...
  • Page 138 Part 3: Closing the Processor Specific steps are as follows: 1. Secure the back panel with the screws. 2. Replace the top cover on the VSP 516S. 3. Fasten it with the screw that were removed in ―Opening the Processor‖ part.

Table of Contents