How To Set Up The Size And Position Of Pip - RGBlink VSP 516S User Manual

6. System Setup and Operation

How to Set up the Size and Position of PIP

How to Set up the Size and Position of PIP
1.In the PIP mode，press I/II button；
2.Press AB button， the key lights， the state selected Sprite source key lights
and shines, right now but alone set Sprite image size and position:① Press
MENU button，through UP/DOWN button，choose【OUTPUT】 ，choose
【SCALE】 ：
According to user needs, can pair respectively picture image size and
position are set：
3. After completion of the setting of the Sprite, again light touch AB key,
lights, this condition selected main screen source key light and shining,
right now but the Lord alone setting image size and position, method and
Sprite set consistent;
Note
VSP 516S
>PIP
>SWAP IMAGE
INPUT
>OUTPUT
FORMAT
>SCALE
>H SIZE
V SIZE
>H POS
V POS
Can also via MENU
set H SIZE,V SIZE,H POS,V POS.
User Manual
ON
OFF
1920
1080
0
0
OUTPUT SCALE to
105