Table of Contents
Advertisement
4. Menu Orientation
MENU
ABOVE: In image 2, if the pixel value is higher than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
BELOW: In image 2, if the pixel value is lower than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel. It should combined with "AND/OR" conditions when
judging.
AND/OR:
AND: All ―Red, Green, Blue‖ value must meet ABOVE or BELOW
conditions.
OR: Any one of ―Red, Green, Blue‖ value should meet ABOVE or BELOW
conditions.
RED: Red limit, cut-off point condition of ABOVE and BELOW condition in
red channel, the range is 0 ~ 255.
GREEN: Green limit, cut-off point condition of ABOVE and BELOW
condition in green channel, the range is 0 ~ 255.
BLUE: Blue limit, cut-off point condition of ABOVE and BELOW condition in
blue channel, the range is 0 ~ 255.
DISPLAY MODE:
MODE: Image mode selection, user can choose different output modes
according to their requirement, such as: black, video image, freeze image,
pure color image, test pattern.
Note
The FRE button can also fulfill this setting.
TEST PATTERN: Test pattern setting, press LEFT/RIGHT button, there are
1-66 kinds of modes for choose.
Notice: When the input comes from DVI, Displayport (DP), VGA, or SDI
VSP 516S
User Manual
53
Advertisement
Table of Contents
