How To Choose The Signal Source In Pip - RGBlink VSP 516S User Manual

6. System Setup and Operation

How to Choose the Signal Source in PIP

How to Choose the Signal Source in PIP
1. Press I/II button，the key lighting，enter PIP mode，LCD display as：
2. Choose the input source of main channel, directly press
CV1,CV2,CV3,SVID,DVI,YPbPr,VGA,SDI are chosen as the main
channel，for example choose the CV2:
3. Press AB button，the key lighting，choose the sub-image signal source，
press the CV1,CV2,CV3,SVID,DVI,YPbPr,VGA,SDI directly as the
sub-main channel for example DVI
4. Press AB button，the KEY light off ，can re-choose the main signal:
Note
VSP 516S
>PIP
>SWAP IMAGE
INPUT CV2
800X600X60
SELECT IMAGE B
INPUT DVI
1024X768X60
SELECT IMAGE A
Main screen and Sprite can choose the same
input signal source, namely the master
screen can show the same picture.
User Manual
ON
OFF
104