Default Mode; Single Image Switching; Pip Setting - RGBlink VENUS X1PRO User Manual

3.4 Default Mode

In default mode, both output channels output the same signal and resolution.
PIP is available for use.
This is the default mode following a reset.

3.4.1 Single Image Switching

Default DP for the current input source, if need switch other signal, for example, DVI, push the
DVI button.
DP button light will be off after pushing the DVI button, and DVI button light will be on if the DVI
signal is effective and stable. If the DVI signal is invalid or no input, DVI button light will flash.
same with above, switch the signals among HDMI and input option signal.

3.4.2 PIP Setting

Enable the PIP function
VENUS X1PRO supports seamless switching for single image and double images.
1. Push the [MENU] button, and enter to menu items, turn the rotary knob, select <OUTPUT>.
->INPUT
->OUTPUT
2. Push the knob to confirm, turn the rotary knob again, and select <PIP>.
->PIP
3. Push the knob to confirm, and enter to the menu items as follows:
VENUS X1PRO
OUTPUT
PICTURE
SPLIT
INPUT
PICTURE
SPLIT
User Manual
Chapter 3 : Using Your Product
>>
>>
>>
>>
>>
>>
>>
>>
>>
26