How To Set Up The Volume - RGBlink VSP 516S User Manual

6. System Setup and Operation

How to Set Up the Volume

How to Set Up the Volume
1. Under single image mode, can be directly through the following steps:
2. Press MUTE button，Mute function open, the current audio is mute,
LCD:
Press MUTE button again， Mute function closed, remove the current was
mute audio.
3. User can choose UP/DOWN button，adjust VOLOMU value，to change
the size of the audio volume value, such as can turn it down to 20:
4. Under the PIP mode, first of all should choose audio input source for
IMAGE A main input or IMAGE B sub- input source, and the specific
steps are as follows:
input source，finish it. Other settings and single screen mode is
consistent, repeat the steps can be 1 to 3.
Note
VSP 516S
>MUTE
VOLUME
>MUTE
VOLUME
>MUTE
VOLUME
Note
Same as MENU
Note
The 【+】or 【-】button can also adjust the value
MENU AUDIO
>AUDIO
HDMI
The 【MSA】button can also switch the audio
channel
User Manual
ON
30
OFF
30
OFF
20
AUDIO
AUDIO IN choose IMAGE A or IMAGE B
IMAGE A
INTERNAL
MUTE ON/OFF
111