RGBlink VSP 516S User Manual page 49

4. Menu Orientation
MENU
Note
The OUT button can also fulfill this setting.
OUTPUT ADJUST: Output adjust menu, the sub-menu as following:
DVI1, setting as following:
DVI MODE: Can select HDMI agreement or DVI; by default is DVI output,
When need HDMI signal output, choose HDMI.
DATE RANGE: DVI1 out range adjustment can choose RGB or YCBCR;
among them the RGB adjusting range is between 0-255, YCBCR adjusting
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting;
V SIZE: Height setting;
H Pos: Horizontal phase setting;
V Pos: Vertical phase setting;
When the signal source of the screen appear black side, can use this
function adjustment, make the image to full screen display.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
DVI2: Including DVI MODE, DATA RANGE, DE ADJUST, and RESET,
same with DVI1.
SCALE：Scale menu as following:
H SIZE: Width setting.
V SIZE: Height setting.
H Pos: Horizontal phase setting.
V Pos: Vertical phase setting.
RESET: If quality image distorts by mistake in improper operation, it can be
VSP 516S User Manual 49