All Key Lights Light On Simultaneously; Check If Dial Switch Is Normal; Color Abnormal When Input Sdi Signal; Adjust Sdi Input Settings - RGBlink VSP 516S User Manual

All Key Lights Light on Simultaneously

Check If Dial Switch is Normal

Shut the power, check if two red dial switches near CV are upward. Reboot
if they face down, and reboot. The function of the red dial switched is
mainly upgraded.

Color Abnormal When Input SDI Signal

Adjust SDI Input Settings

The VSP 516S may appear color abnormal when input SDI signal, it needs
adjust the SDI input setting, specific operations are as follows:
Press "MENU" key and select "INPUT" option, select "SDI ADJUST"
through UP/DOWN key, and adjust H POS value through LEFT/RIGHT
key, it need not to save after setting.

Spottted Image or Freeze When Switch CV Signal

Normal Phenomenon

This is the normal phenomenon, you can set consistent CV input
resolutions to avoid spotted image, but this is cut seamless switching,
without fade in fade out effect.
VSP 516S User Manual 124