Using The Menu; Understanding The Display - RGBlink VENUS X2 User Manual

3.3 Using the Menu

Use the menu system for convenient and intuitive operation. VENUS X2 OLED display shows the
menu items. The OLED display will show the default state when the menu is not in use, or the
operation has timed out. Using the MENU button and rotary knob in the front panel, the OLED
display will show the corresponding menus according to user selections.

3.3.1 Understanding the Display

Turn the power switch to the ON position, the OLED display will show the start-up interface and
show the default menu after completing initialization as below:
Introduce for the above information:
Timer
1 Shows the timer state of the product.
When not displayed here, the timer can be set via the
Ethernet
2 Displays whether Ethernet connection is active or inactive. Ethernet settings are
available in the
Temperature
3 Shows the temperature of the product.
When not displayed here, the temperature can be found via the
Fan Control
4 Shows the current speed of the product.
When not displayed here, the speed can be set via the
IP Address
5 Shows the IP address of the product.
When not displayed here, the IP address can be set via the
Output Resolution
6 Show the current output resolution. A wide range of resolutions are supported – refer
to Specification.
VENUS X2
SYSTEM menu.
User Manual
Chapter 3 : Using Your Product
SYSTEM menu.
SYSTEM menu.
SYSTEM menu.
SYSTEM menu.
15