Table of Contents
Advertisement
6. System Setup and Operation
How to Achieve Multiple Cascade
How to Achieve Multiple Cascade
The working principle of VSP 516S multiple cascade is assigned the front
signal to corresponding VSP 516S video processors, again synchronous
external timing through processor, and wholly enlarge the picture and
intercept corresponding display area according to the corresponding
control area to achieve the function of integral display a complete picture,
through the central control or computer, it can realize the synchronous
broadcasting and at the same time seamless switching.
Here, we will illustrate the operation. For example, the LED display is
2400 * 1024, and now we will cascade with 2 VSP 516S, specific steps
are as follows:
1. Connection and Setting
(1) Connect the DVI signal to DVI interface of the two VSP 516S through
DVI distributor (DXP 0108).
(2) Divide the LED display into two parts, respectively for 1152*1024 and
1248*1024, and connect the DVI output interface of the two VSP 516S
to two sending cards.
(3) Press 【DVI】 button to choose DVI input signal for the two VSP 516S,
and set both the VSP 516S output resolution for 1280 * 1024 through
【OUT】 button.
2. Multiple Cascade
(1) Press【SCALE】 button of the first VSP 516S, and scale the screen
to the actual points.
Choose the width 【〉H SIZE】 in menu option, and set the width for
1152 through number key or rotate the knob, press the knob to confirm.
Then rotate the knob, and choose the height 【〉V SIZE】 in menu
option, and set the height for 1024 through number key or rotate the
knob, press the knob to confirm. If input the wrong value, press
【MENU】 key to exit. The same method, set the width and height of
VSP 516S
User Manual
117
Advertisement
Table of Contents
