How To Set Up The Pip - RGBlink VSP 516S User Manual

6. System Setup and Operation

How to Set up the PIP.

How to Set up the PIP
Push the [SAVE/PIP1] or[LOAD/PIP2] button for two times, button led light
turn on, and enter the PIP function menu. OLED module show as follows:
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can
realize the IMAGE A and IMAGE B exchange.
ALPHA: Can set the image transparency, the regulating range is among 0
to 16.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B
individually.
VSP 516S
>PIP
LAYOUT
SWAP IMAGE
ALPHA
PBP L+R
Note
User can also select IMAGE A or IMAGE B by
[IMAGE1/IMAGE2] reuse button.
User Manual
ON
PIP L+T
OFF
0
PBP T+B
97