Table of Contents
Advertisement
PostScript PPD Printer Driver setting (Mac OS 9)
Transparency Interleave
Printed
Blank
Transparency Interleave cannot be set in the following cases:
- When the [Transparency] is not selected for [Media] in the [Print] - [Printer
Specific Options] dialog box (1)
Paper Tray (Transparency Interleave)
Uses to select the paper tray for Transparency Interleave.
The Paper Tray (Transparency Interleave) cannot be set in the following cas-
es:
- When the [Transparency] is not selected for [Media] in the [Print] - [Printer
Specific Options] dialog box (1).
- When the [Paper Sources] is not selected in the [Configure] dialog
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. You can use this when printing a large volume document, such as
multiple sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
the [Printing] dialog box will appear.
2
Select [Printer Specific Options (2)]
of optional menu.
3
Click [Wait Mode] to display the list. Then select [Wait Mode] or [Proof
and Print].
–
Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
–
Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
IC-203
This is set when inserting the printed interleaf for
the transparent sheet.
This is set when inserting the blank interleaf for
the transparent sheet.
11
11-33
Advertisement
Table of Contents
