Utility Tool
15.1.1 Outline of the PageScope Web Connection
This section describes the outline of the PageScope Web Connection.
The Administrator of the print controller can change the settings of the print
controller with this tool.
The general users can display the status of the print controller but cannot
change the settings.
This chapter describes the functions that can be used by the general user.
Status to be shown
You can display the status of the print controller by using PageScope Web
Connection.
The status you can display are as follows;
- Summary
- Device Information
- Detail - Input Tray
- Detail - Output Tray
- Detail - Hard Disk
- Detail - Interface Information
- Detail - Consumables
- Counter
- Online Assistance
- Active Job List - Prin
- Active Job List - Scan Send
- Done Job List - Print
- Done Job List - Scan Send
- Default Setting - General Setting
- Default Setting - PCL Setting
- Default Setting - PS Setting
- Default Setting - TIFF Setting
Report to be printed
You can print the report as follows;
- Configuration page
- PCL Font List
- PCL Demo Page
- PostScript Font List
- PostScript Font Page
IC-203
15
15-2