Table of Contents
Advertisement
Installation (Local printing)
Installing to Windows NT4.0 (PCL6/PPD)
To install the PCL6/PPD printer driver to Windows NT4.0, perform the follow-
ing steps. The installation should be performed by a qualified system admin-
istrator or printer administrator.
0 In case you install the PCL driver, you can check the location of the [.inf]
file through the IC-203 CD-ROM start-up screen.
1
Turn on the computer and start Windows NT4.0.
2
Log on as an administrator (or a user entitled to install a printer).
–
Exit from all active Windows applications, if required.
3
Click [Start] of the task bar. Then, select [Settings] of the Start menu
and click [Printers] from the sub-menu.
The [Printers] window appears.
4
Double-click [Add Printer] icon of the [Printers] window.
The [Add Printer Wizard] window will appear to add the printer.
5
Select [My Computer].
–
When the printing system is
directly connected to a com-
puter in which the printer driv-
er will be installed, select [My
computer]. When the printing
system is managed by a com-
puter in which the printer driv-
er will be installed, also select
[My computer].
–
When personal computers or workstations are connected to the
network and you want to print via the network, select [Network
printer server]. In case refer to "Installing to Windows NT4.0 (PCL6/
PPD)" on Page 5-7.
6
Click [Next].
The window to select the printer port will appear.
IC-203
4
4-7
Advertisement
Table of Contents
