Installation (Network Printing) - Konica Minolta IC-203 User Manual

Installation (Network printing)

5 Installation (Network printing)
To use the print controller as a local printer, following preparations are re-
quired;
1
Configure the network environment.
2
Prepare Ethernet cable and connect the print controller and your com-
puter to your network.
3
Install the printer driver for network printing to your computer.
4
Test print.
This chapter describes how to install the printer driver for network printing to
Windows-compliant computers and Macintosh and how to print the test
page.
Refer to "Installation (Local printing)" on Page 4-1 about local printing.
This chapter also describes the outline of the network configuration.
Refer to the Copier's manual about the network configuration of the copier.
IC-203
5
5-1