Table of Contents
Advertisement
PCL Printer Driver Setting (Windows)
Settings
When click this button, the [Image Shift Settings] dialog appears.
Switch Setup
Front Side
Back Side
Outside Offset
Back Side Auto Setup
Divide Output
Repeats to staple for every number of pages specified.
The [Divide Output] cannot be set in the following cases:
- When [Staple] is not available in the [Setup] tab.
Page per Section
When the [Divide Output] is selected, you can set the number of pages for
repeating the function.
Adhesive Binding
Selects when doing adhesive binding using an adhesive binder.
The [Adhesive Binding] cannot be set in the following cases:
- When an item other than [Double-Sided] is selected in the [Setup] tab -
[Print Type].
IC-203
It specifies whether the Image Shift sets up by the driver
side or the printer side.
Set the shift amount for the front side.
Set the shift amount for the back side.
[Outside Offset] is a function to adjust so that the print
image is shifted toward the outside as the pages ad-
vance, according to the thickness of the folded booklet
when the [Booklet] has been set up.
Set the amount of the back side as that of front side.
8
8-43
Advertisement
Table of Contents
