Table of Contents
Advertisement
PostScript PPD Printer Driver setting (Windows)
Media
Selects the type of paper as the output paper as shown below.
Types of paper that can be selected.
No Setting
Plain Paper
Thick 1
Thick 2
Fine
User
Blank Insert
Thin
Trace
Recycled
Label
Transparency
Exclusive A - M
The [Transparency] cannot be set in the following cases:
- When any item other than [OFF] is selected for the [Advanced Options] -
[Duplex], [Fold], [Staple], [Punch], [Combination], [Front Cover Page],
[Back Cover Page].
Advanced
Opens the [KONICA MINOLTA 920 PS(P) Advanced Options] window. For
more information, refer to "Advanced Options windows" on Page 9-21.
IC-203
This is set when printing coated paper such
as pamphlet.
This is set when printing thick paper such
as a post card.
This is set when printing fine paper such as
memo paper.
This is set when printing the user specified
paper set on the copier.
This is set when printing blank paper such
as cover sheet.
This is set when printing thin paper.
This is set when printing trace paper.
This is set when printing recycled paper.
This is set when printing the paper such as
label.
This is set when printing OHP sheet.
This is set when printing the exclusive pa-
per.
9
9-20
Advertisement
Table of Contents
