Konica Minolta IC-203 User Manual page 226

PostScript PPD Printer Driver setting (Windows)
Punch
The output paper can be set to be punched with 2 holes,3 holes or 4 holes.
Punch holes which can be specified vary depending on the destinations.
- USA:
- Others: Either 2 or 4 holes can be specified.
The position will be changed according with the [Binding Position] setting.
2 Holes / Left Binding
2 Holes / Left Binding
2 Holes / Top Binding
The [Punch] cannot be set in the following cases:
- When the [Punch Z-Fold Unit] is not available in the [Device Settings] tab
- [Installable Options]
- When the other than [Z-fold] is selected in the [Fold].
IC-203
Either 2 or 3 holes can be specified.
(Portrait)
ABCD
(Landscape)
ABCDEF
(Portrait)
ABCD
2 Holes / Right Binding
(Portrait)
ABCD
2 Holes / Right Binding
(Landscape)
ABCDEF
2 Holes / Top Binding
(Landscape)
ABCDEF
9
9-27