Left Side Section - JVC gy-dv5100 Instructions Manual

2-3 Left Side Section

1 [MONITOR OUT] Monitor output connector (BNC)
● Composite video signal output connector.
● Video signals with setup level are output.
(Whether or not setup level output should be enabled or
disabled can be selected with the SETUP item on the
AUDIO/VIDEO menu screen.)
Camera mode: The camera image is output.
VTR mode: The playback image is output in the VTR
playback mode. When a DV signal (IEEE1394) is input,
the EE image of the input video signal is output.
MEMO:
● When the OUTPUT CHAR. item on the OTHERS
(1/2) menu screen is set to ON, the same on-screen
indications as those on the viewfinder will be shown
on the external monitor. (Black and white indications)
● The setup signal can be selected also for the EE
output signal of the DV input.
2 [Y/C OUT] Y/C output connector (4-pin)
● Output connector for separate YC video signal.
● Video signals with setup level are output. (Whether or
not setup level output should be enabled or disabled can
be selected with the SETUP item on the AUDIO/VIDEO
menu screen.)
Camera mode: The camera image is output.
VTR mode: The playback image is output in the VTR
playback mode. When a DV signal (IEEE1394) is input,
the EE image of the input video signal is output.
MEMO:
● When the ASPECT RATIO item on the CAMERA
OPERATION menu screen is set to LETTER or
SQUEEZE, 16:9 aspect ratio distinction ID signal is
output.
● When the OUTPUT CHAR. item on the OTHERS
(1/2) menu screen is set to ON, the same on-screen
indications as those on the viewfinder will be shown
on the external monitor. (Black and white indications)
● The setup signal can be selected also for the EE
output signal of the DV input.
Downloaded From CamcorderManual.com JVC Manuals
2. CONTROLS, INDICATORS AND CONNECTORS
LINE OUT
CH-1
Y/C OUT MONITOR OUT
CH-2
e w q
FRONT
MIC IN
LENS
3 [CH-1/CH-2 LINE OUT] CH-1/CH-2 line output
connector (RCA)
Output connector for audio signals.
● Outputs the input audio signal in the Camera mode.
● Outputs the playback audio signal in the VTR mode.
● When a DV signal (IEEE1394) is input, the EE sound of
the input audio signal is output in the VTR mode.
MEMO:
● Alarm sound is not output.
4 Microphone attachment holes
For attaching the microphone holder KA-A50U (optional)
when the optional microphone MV-P615U or MV-P618U is
used.
☞ See "Attaching the Microphone (optional)" on page 33.
r
17