Left Side Section - JVC GY-DV300 Instruction Manual

CONTROLS,
INDICATORS AND CONNECTORS
U [VIDEO OUT] Video output connector (RCA)
Output connector for composite video signal.
Outputs the input video signal and playback
picture.
● When the OUTPUT CHAR. item on the
DISPLAY [2/2] menu screen is set to MIX, on-
screen-indicators like those shown on the LCD
monitor screen can be output. (black and white
display)
V [Y/C OUT] Y/C video output connector (4-pin)
Separate YC video signal output connector.
Outputs the input video signal and playback
picture.
● When the OUTPUT CHAR. item on the
DISPLAY [2/2] menu screen is set to MIX, on-
screen-indicators like those shown on the LCD
monitor screen can be output. (black and white
display)
● When the ASPECT item is set to LETTER on
the SYSTEM [2/2] menu screen, an ID signal
for identifying the wide-screen aspect is
output.
E-18

Left Side Section

#6 #2 #5 #4
W [CH-1/CH-2 LINE OUT] CH-1/CH-2 audio
output connector (RCA)
Output connector for audio signal. In the
shooting mode the input audio signal is output.
In the VTR mode the playback sound is output.
X [EARPHONE] Earphone jack
This is a jack for connecting an earphone for
monitoring the sound. Plug in an earphone or
headphone with a 3.5 mm diameter plug.
Monaural sound is output.
Select the output sound with the MONITOR
switch N. The volume of the monitor sound in
the shooting mode is set with the EARPHONE
LEVEL item on the TOP MENU screen.
The playback sound from the built-in speaker is
not output when an earphone is plugged into
this jack.
#7
MIC 1 IN
MIC 2 IN
#3 #1