Left Side Section - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 16 Tuesday, October 24, 2006 3:11 PM
CONTROLS, INDICATORS AND CONNECTORS

Left Side Section

9 8 7
0 6 5
1Viewfinder connector (6-pin)
Connect the cable from the viewfinder here.
• Set the image format for this terminal in VF SIGNAL on
the LCD/VF[4/4] menu screen. X See page 92.
2[CH-2 INPUT] CH-2 audio input connector selector
switch
Selects the CH-2 audio input connector.
INPUT1 : Inputs the audio from the INPUT1 connector
4 into CH-2.
INPUT2 : Inputs the audio from the INPUT2 connector
4 into CH-2.
MEMO
The audio from the INPUT1 connector is also input into
CH-1 regardless of the setting.
3[AUDIO INPUT] Audio input signal selector switch
This switch is used to select the input sound signal from
INPUT1 or INPUT2 connector.
LINE : Set to this position when connected to audio
equipment, etc. The reference input level is
+4 dBs.
MIC : Set to this position when the dynamic micro-
phone is connected.
MIC+48V : Set to this position when a microphone
requiring +48 V power supply (phantom
microphone, etc.) is connected.
CAUTION
When connecting a component that does not require +48 V
power supply, make sure that the switch is not set to
MIC+48V before the component is connected.
MEMO
You can select the normal input level for MIC and MIC+48V
in the INPUT1, 2 MIC REF. item on the AUDIO/MIC[1/2]
menu screen.
X See page 87.
16
4[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec-
tors
These are audio input connectors for connecting to an
external audio device or microphone.
• Set the [AUDIO INPUT] switch 3 according to the
device to be connected.
• Set the CH-2 audio input connector using the [CH-2
INPUT] switch 2.
The CH-2 audio from the set connector is recorded.
5Shoulder pad slide button
1
Button to adjust the position of the shoulder pad.
When you press this button, you can move the position of
2
the shoulder pad 6 forward or backward.
3
6Shoulder pad
7Cassette cover
Sliding the EJECT switch a on page 18 located on the
top section opens this cover to allow insertion or removal
of the videocassette.
4
CAUTION
To prevent foreign objects from entering the internal parts of
the VTR unit, do not leave this device with the cover open
for extended periods of time.
8[VIDEO OUT] Video output terminal (RCA)
This is a terminal for composite video signal output.
• Select whether or not to output a signal with setup in
SET UP on the VIDEO FORMAT[2/2] menu screen.
(Only for U model)
9[AUDIO OUTPUT CH-1/CH-2] Audio output connector
(RCA)
Output connector for audio signals.
• Outputs the input audio signal in the Camera mode.
• Outputs the playback audio signal in the VTR mode.
• When a HDV/DV signal (IEEE1394) is input, the EE
sound of the input audio signal is output in the VTR
mode.
MEMO
Alarm sound is not output.
0[IEEE1394] IEEE1394 connector (6-pin)
Using an IEEE1394 cable (optional), a digital video com-
ponent with IEEE1394 connector can be connected here.
X See "Connecting the IEEE1394 Cable" on page 64.
X See "HDV/DV Dubbing" on page 68.
CAUTION
When connecting the IEEE1394 cable, confirm that the
connector is facing the right direction before inserting.
X See page 64.
MEMO
Put the covers on the connectors when you are not using
them.