Changing The Frequency Step - Pioneer VSX-930-k Operating Instructions Manual

05
! In case of VSX-830
Input function
BD
DVD
SAT/CBL
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5/MHL
INTERNET RADIO
Spotify
MEDIA SERVER
FAVORITES
iPod/USB
TV
CD
TUNER
BT AUDIO
a When ARC at HDMI Setup is set to ON, it is not possible to make assignments to the TV input's Audio In terminals.
Input Terminals
HDMI Audio
(BD)
IN 1
k
IN 2
k
k
k
IN 3
IN 4
IN 5
OPTICAL
<a>
COAXIAL
Changing the OSD display language (OSD Language)
The language used on the Graphical User Interface screen can be changed.
! The explanations in these operating instructions are for when English is selected for the GUI screen.
! With factory default settings, the on-screen display will be output from all HDMI output terminals and dis-
played on any TV connected via HDMI cable.
VSX-930 only: You can change where the screen is output in the MAIN/HDZONE
(page 88 ) settings.
1 Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver (for example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now selected).
2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
3 Select 'System Setup' from the Home Menu.
4 Select 'OSD Language' from the System Setup menu.
5 Select the desired language.
6 Select 'OK' to change the language.
The setting is completed and the System Setup menu reappears automatically.
Changing the TV format setting
If the Graphical User Interface screen is not displayed correctly, it may be that the TV system is set incorrectly for
your country or region.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press u STANDBY/ON.
The display shows RESET c NO d.
3 Use TUNE i/j to select PAL/NTSC c PAL d, and then use PRESET k/l to select PAL or
NTSC.

Changing the frequency step

If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/
region. Here's how to switch the setting:
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press u STANDBY/ON.
The display shows RESET c NO d.
Use TUNE i/j to select FREQ STEP c 9k d, and then use PRESET k/l to select 9k or 10k.
3
60
Basic Setup
(page 111 ) and HDMI output