Listening To Station Presets; Naming Preset Stations; Changing The Radio Frequency Step - Pioneer VSX-520-K Operating Instructions Manual

Multi-channel
Table of Contents

Advertisement

Available languages

Available languages

Using the tuner
1
Tune to a station you want to memorize.
See Listening to the radio on page 40 for more
on this.
2
Press TUNER EDIT.
The display shows PRESET, then a blinking
MEM and station preset.
Press PRESET / to select the station
3
preset you want.
You can also use the number buttons.
4
Press ENTER.
After pressing ENTER, the preset number stop
blinking and the receiver stores the station.

Listening to station presets

You will need to have some presets stored to do
this. See Saving station presets on page 40 if
you haven't done this already.
Press PRESET / to select the station
preset you want.
• You can also use the number buttons on
the remote control to recall the station
preset.

Naming preset stations

For easier identification, you can name all of
your preset stations.
1
Choose the station preset you want to
name.
See Listening to station presets above for how
to do this.
2
Press TUNER EDIT twice.
The cursor at the first character position is
blinking on the display.
3
Input the name you want.
Choose a name up to eight characters long.
• Use the PRESET / buttons to select
character position.
• Use the TUNE / buttons to select
characters.
• The name is stored when ENTER is
pressed.
Tip
• To erase a station name, follow steps 1
and 2, and press ENTER while the display
is blank. Press TUNER EDIT while the
display is blank, to keep the previous
name.
• Once you have named a station preset,
Press DISP to show the name. When you
want to return to the frequency display,
press DISP several times to show the
frequency.
Changing the radio frequency
step
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here's how to
switch the setting:
1
Switch the receiver into standby.
While holding down the TUNE  button,
2
press and hold the  STANDBY/ON button
for about two seconds.
• The channel tuning step alternates
between 10K STEP and 9K STEP each time
you do this.
06
41
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents