Changing The Osd Display Language (Osd Language); Before You Start Changing The Tv Format Setting; Changing The Frequency Step; About The Home Menu - Pioneer SC-LX88 Operating Instructions Manual

04

Changing the OSD display language (OSD Language)

The language used on the Graphical User Interface screen can be changed.
! The explanations in these operating instructions are for when English is selected for the GUI screen.
! With factory default settings, the on-screen display will be output from all HDMI output terminals and
displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE (page 109 ) and HDMI output
1 Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver (for example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now selected).
2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
3 Select 'System Setup' from the Home Menu.
4 Select 'OSD Language' from the System Setup menu.
5 Select the desired language.
6 Select 'OK' to change the language.
The setting is completed and the System Setup menu reappears automatically.

Changing the TV format setting

If the Graphical User Interface screen is not displayed correctly, it may be that the TV system is set incorrectly for
your country or region.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press u STANDBY/ON.
The display shows RESET c NO d.
3 Use TUNE i/j to select PAL/NTSC c PAL d, and then use PRESET k/l to select PAL or
NTSC.

Changing the frequency step

If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/
region. Here's how to switch the setting:
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press u STANDBY/ON.
The display shows RESET c NO d.
Use TUNE i/j to select FREQ STEP c 9k d, and then use PRESET k/l to select 9k or 10k.
3
(page 84 ) settings.

About the Home Menu

This receiver's Home Menu (HOME MENU) can be used to make various settings and to check and adjust items
that have been set.
! With factory default settings, the Home Menu screen will be output from all HDMI output terminals
and displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE (page 109 ) and HDMI output
1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode.
2 To display the Home Menu screen, press HOME MENU on the remote control.
1. MCACC PRO
2. MCACC Data Check
3. Data Management
4. System Setup
5. Network Information
6. Operation Mode Setup
Exit
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust
as necessary.
! MCACC PRO – Use this to make automatic settings and detailed manual settings for the surround sound. For
details, see Making receiver settings from the MCACC PRO menu
! MCACC Data Check – This displays the MCACC PRO measurement results. Use it to check the MCACC
memory. For details, see Checking MCACC Data
! Data Management – Use this to manage the data in the MCACC memory. For details, see
on page 101 .
! System Setup – Use this to make various settings related to this system. For details, see
tings from the System Setup menu on page 103
! Network Information – The setting status of the network-related items can be checked. For detail, see
Checking the Network Information on page 107
! Operation Mode Setup – Use this to select this receiver's operation mode. For details, see
Setup on page 53 .
54
Basic Setup
(page 84 ) settings.
HOME MENU
A/V RECEIVER
Return
on page 95 .
on page 100 .
Data Management
Making receiver set-
.
.
Operation Mode