Table of Contents
Advertisement
10
Using the MULTI-ZONE controls
VSX-930 only
The following steps use the front panel controls to adjust the sub zone volume and select sources. See
remote controls
on
page 89
.
Important
! The settings must be changed at ZONE Setup in order to use the multi-zone function
1
Press MULTI-ZONE ON/OFF on the front panel.
The zone switches between on and off each time the button is pressed.
The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON.
2
Press MULTI-ZONE CONTROL on the front panel.
Each press will switch between main zone and sub zone control.
! When the receiver is on, make sure that any operations for the sub zone are done while ZONE and your
selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone
only.
If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show
in the display.
3
Use the INPUT SELECTOR dial to select the source for the zone you have selected.
For example, HDZONE SAT/CBL sends the source connected to the SAT/CBL inputs to the primary (HDZONE)
sub room.
! If you select TUNER, you can use the tuner controls to select a preset station (see
page 66
if you're unsure how to do this). The tuner cannot be tuned to more than one station at a time.
Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not
to change stations when recording a radio broadcast.
4
Use the MASTER VOLUME dial to adjust the volume for the sub zone.
5
When you're finished, press MULTI-ZONE CONTROL again to return to the main zone
controls.
You can also press MULTI-ZONE ON/OFF on the front panel to switch off all output to the sub zone.
! You won't be able to switch the main zone off completely unless you've switched off the MULTI-ZONE control
first.
! If you don't plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main
rooms so that this receiver is in standby.
Note
When HDZONE is turned on, the video converter function is disabled. For that reason, video connected with the
video cable or component cable is not output from the HDMI terminal. To enable the video converter function,
turn off HDZONE.
HDZONE remote controls
Before operation, hold down HDZ on the remote control (for 1.5 seconds) until the remote control LED flashes
one time.
HDZONE
The following table shows the possible HDZONE remote controls:
Button(s)
u
ALL
(page 111
).
Input function buttons
VOLUME +/–
<a>
MUTE
<a>
a You can operate this only when Speaker System is set to HDZONE.
Network settings from a web browser
Network settings can be made using the browser on a computer connected to the same LAN as the receiver.
1
Press u STANDBY/ON to switch on the receiver.
2
Turn on the computer's power and launch the Internet browser.
Saving station presets
on
3
Input the receiver's IP address into the browser's address input field.
Access the IP address"http://(the receiver's IP address)" from a web browser. You can display the IP address of
the unit on the unit's display by pressing the STATUS button on the remote control.
When connected with the receiver, the AVNavigator menu screen appears in the browser.
4
On the AVNavigator menu screen, select Network Setup.
5
Select the item you want to set.
Using the sleep timer
The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without
worrying about the receiver being left on all night. Use the remote control to set the sleep timer.
%
Press SLEEP repeatedly to set the sleep time.
! You can check the remaining sleep time at any time by pressing SLEEP once. Pressing repeatedly will cycle
through the sleep options again.
! The sleep timer is valid for all zones. If any zone is on, the sleep timer continues functioning.
89
Using other functions
What it does
Switches on/off power in the HDZONE.
Use to select the input function in the HDZONE.
Use to select the input function directly (this may not work for some functions) in the
HDZONE.
Use to set the listening volume in the HDZONE.
Mutes the sound or restores the sound if it has been muted (adjusting the volume also
restores the sound).
30 min
60 min
Off
90 min
Advertisement
Table of Contents
