Table of Contents
Advertisement
04
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so
there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see
page 82
).
After setting the ARC, some time may be required for the connected device to be recognized and the sound to
be produced.
— If you use a coaxial digital audio cable, you'll need to tell the receiver which digital or analog audio input you
connected the TV to (see
The Input Setup menu
— Please refer to the TV's operation manual for directions on connections and setup for the TV.
! If the TV to be connected using HDMI supports 4K/60p, you can switch the 4K/60p signal input setting in
accordance with TV performance. When the 4K/60p setting is changed to 4:4:4, the video image may not be
output normally unless the HDMI cable supports 4K/60p 4:4:4 24 bit (18 Gbps transmission). In such a case,
select 4:2:0
(page 88
).
! You cannot input 4K/60p 4:4:4 24 bit video from HDMI IN 3 to the IN 5 terminal. Use the BD IN, HDMI IN 1 or
HDMI IN 2 terminal.
About video outputs connection
This receiver is not loaded with a video converter. When you use HDMI cables for connecting to the input device,
the same cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of this unit will not be output from the HDMI OUT
terminal.
IN
HDMI
OUT
HDMI
Video signals can be output.
HDMI Setup
on
page 59
).
Playback component
IN
Terminal for connection
with source device
VIDEO
MONITOR
OUT
Terminal for connection
with TV monitor
VIDEO
The OSD will not
appear.
TV
Connecting your equipment (In case of VSX-830)
Connection when there is no HDMI terminal on the TV or player equipment
When there is no HDMI terminal on either the TV or player equipment, connect the equipment each with an ana-
logue video cable.
on
Important
Also, when the receiver and TV are connected by anything other than an HDMI cable, the OSD function allow-
ing display of the receiver's settings, operations, etc., on the TV's screen cannot be used. In this case, watch the
receiver's front panel display while performing the various operations and making settings.
TV
VIDEO IN
VIDEO
OUT
1
BD
( DVD )
( SAT/CBL )
ARC CONTROL
MONITOR OUT
R
L
DVD
SAT/CBL
VIDEO IN
AUDIO IN
43
DVD player, etc.
Select one
VIDEO OUT
HDMI OUT
DIGITAL OUT
VIDEO
OPTICAL
COAXIAL
HDMI IN
1 5 -
ASSIGNABLE
( OUTPUT 5 V
2
3
4
5
/MHL
0.9 A MAX )
DIGITAL IN
1
OPTICAL
( TV )
ASSIGNABLE
1
COAXIAL
( CD )
ASSIGNABLE
OUT
HDMI IN
ASSIGNABLE
1 5 -
1
BD
2
3
4
5
/MHL
(OUTPUT 5 V
0.9 A MAX)
(DVD)
(SAT/CBL)
DIGITAL IN
ARC CONTROL
1
(TV)
OPTICAL
ASSIGNABLE
1
COAXIAL
(CD)
ASSIGNABLE
MONITOR OUT
R
L
DVD
SAT/CBL
VIDEO IN
AUDIO IN
AUDIO OUT
R
ANALOG
L
Advertisement
Table of Contents
