Pioneer VSX-930-k Operating Instructions Manual page 33

03
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 82 .
% Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
Sub zone (HDZONE)
HDMI IN
(page 111
HDMI
Main zone
HDMI OUT
2 1
HDMI OUT HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
2 1
HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
Multi-zone connection using the HDMI terminal and speaker terminals
(HDZONE)
).
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 82 .
! You must select HDZONE in Speaker system setting (page 106
1 Connect the speaker to the surround back speaker terminal.
Which speaker terminal is connected defers depending on the Speaker System
see Installing your speaker system on page 23
The following figure shows the connection of the surround back speaker terminal.
2 Connect a TV monitor to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Sub zone (HDZONE)
2
HDMI IN
L R
1
33
Connecting your equipment (In case of VSX-930)
(page 111
) to use this setup.
(page 106
.
Main zone
HDMI OUT
2 1
HDMI OUT
HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
2 1
HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
).
HDMI
) setting. For details,
SURROUND BACK
R L (Single)
HDZONE / BI-AMP
SURROUND BACK
R L
(Single)
HDZONE / BI-AMP