Table of Contents
Advertisement
10
Dimming the display
You can choose between four brightness levels for the front panel display. Note that when selecting sources, the
display automatically brightens for a few seconds.
Turning off the display is effective for suppressing noise from the display that affects sound quality.
%
Press DIMMER repeatedly to change the brightness of the front panel display.
! You can also choose to turn the display off. In this case, the FL OFF indicator lights.
Checking your system settings
Use the status display screen to check your current settings for features such as surround back channel process-
ing and your current MCACC preset.
1
Press STATUS.
Use i/j to check the system setting.
2
The information on the main unit display switches as shown below each time one of the buttons is pressed.
IP address f Wi-Fi status (displayed when running Wi-Fi) f audio format f sampling frequency f MCACC
memory f auto-phase control plus correction result value f Input source played with HDZONE (VSX-930 only)
f HDMI output settings (VSX-930 only)
! For some settings, some items are not displayed.
! When the auto phase control plus correction value displays '---', disks cannot be adjusted using AUTO.
Please adjust manually
(page 85
).
3
When you're finished, press STATUS again to switch off the display.
90
Using other functions
Advertisement
Table of Contents
