Table of Contents
Advertisement
13
Making receiver settings from the System Setup menu
The following section describes how to change the speaker-related settings manually and make various other
settings (input selection, OSD language selection, etc.).
! With factory default settings, the on-screen display will be output from all HDMI output terminals and dis-
played on any TV connected via HDMI cable.
VSX-930 only: You can change where the screen is output in the MAIN/HDZONE
(page 88
) settings.
1
Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver.
2
Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
! Press HOME MENU at any time to exit the HOME MENU.
3
Select 'System Setup' from the HOME MENU, then press ENTER.
4
Select the setting you want to adjust.
! Input Setup – Specifies what you've connected to the digital, HDMI and component video inputs (see
Input Setup menu
on
page 59
).
! HDMI Setup – Synchronizes this receiver with your Pioneer component supporting Control with HDMI
81
).
! Manual SP Setup – Sets the type of connection used for surround back terminals and the size, number dis-
tance and overall balance of the connected speakers (see
! MHL Setup – Changes the settings related to MHL (see
! OSD Language – The GUI screen's display language can be changed (see
guage (OSD Language)
on
page 60
).
! Other Setup – Makes customized settings to reflect how you are using the receiver (see
menu
on
page 109
).
(page 111
) and HDMI output
The
(page
Manual speaker setup
on
page 106
).
MHL Setup
on
page 109
).
Changing the OSD display lan-
The Other Setup
Manual speaker setup
This receiver allows you to make detailed settings to optimize the surround sound performance. You only need
to make these settings once (unless you change the placement of your current speaker system or add new
speakers).
These settings are designed to customize your system, but if you're satisfied with the settings made in
Automatically conducting optimum sound tuning (Full Auto MCACC)
of these settings.
CAUTION
! The test tones used in the Manual SP Setup are output at high volume.
1
Select 'Manual SP Setup', then press ENTER.
See
Making receiver settings from the System Setup menu
2
Select the setting you want to adjust.
If you are doing this for the first time, you may want to adjust these settings in order:
! Speaker System – Specifies how you are using your surround back speaker terminals and B speaker termi-
nals
(page 106
).
! Speaker Setting – Specifies the size and number of speakers you've connected
! Channel Level – Adjusts the overall balance of your speaker system
! Speaker Distance – Specifies the distance of your speakers from the listening position
! X-Curve – Adjusts the tonal balance of your speaker system for movie soundtracks
3
Make the adjustments necessary for each setting, pressing RETURN to confirm after each
screen.
Speaker system setting
In case of VSX-930
! Default setting: 7.2ch/5.2.2ch
This receiver can be used for various applications such as surround back terminal and top middle speaker termi-
nal. Here, application for these terminals are set. Select from the following items.
1
Select 'Speaker System' from the Manual SP Setup menu.
See
Making receiver settings from the System Setup menu
2
Select the speaker system setting.
! 7.2ch/5.2.2ch – Select when connecting surround back or top middle speaker and playing a maximum 7.2 ch
surround.
! 7.2ch SB/FW – Select when connecting surround back or front wide speaker and playing a maximum 7.2 ch
surround.
! Speaker B – Select to use the B speaker terminals to listen to stereo playback in another room (see
the speaker terminals
on
page 87
).
! Front Bi-Amp – Select this setting if you're bi-amping your front speakers (see
page 25
).
! HDZONE – Select to use the surround back speaker terminals for an independent system in HDZONE (see
Using the MULTI-ZONE controls
on
page 89
106
The System Setup and Other Setup menus
on
page 57
, it isn't necessary to make all
on
page 106
if you're not already at this screen.
(page 107
).
(page 108
).
(page 108
(page 108
on
page 106
if you're not already at this screen.
Bi-amping your speakers
).
).
).
Switching
on
Advertisement
Table of Contents
