Scan Sensitivity Setting - Fm - Roberts SPLASH MINI Manual

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough
function.
1. Press and release the On/Off button to switch on your radio.
2. Press and release the Band button until the FM mode is selected.
3. Press and hold the Info / Menu button. The FM menu will show on
the display.
4. Press and release the Tuning Up or Down buttons until 'SCAN' shows
on the display. Press and release the Select button.
5. Press and release the Tuning Up or Down buttons to switch between
'LOCAL' and 'DISTANT' options on the display. The Distant option will
6. Press and release the Select
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
19
1
2
3
4,5 4,5
4,6
FM
FM
FM