Agilent Technologies 5975 Operation Manual page 98

3
Operating in Electron Impact (EI) Mode
Front thumbscrew
Rear thumbscrew
Figure 19 Side plate thumbscrews
The MSD can now be stored or moved. The foreline pump cannot be
disconnected; it must be moved with the MSD. Make sure the MSD remains
upright and is never tipped on its side or inverted.
The MSD must remain upright at all times. If you need to ship your MSD to another
CA UT IO N
location, contact your Agilent Technologies service representative for advice about
packing and shipping.
98 5975 Series MSD Operation Manual for MassHunter