Figure 5
5 Next, feed the outlet side of the column through the 3 o'clock positioned
Be careful not to scratch the column coating.
CA UT IO N
5975 Series MSD Operation Manual for MassHunter
Column fed through 1 o'clock position
clips so that the column outlet is pointing toward the back of the column
cage. Make sure that the part of the column that is between the two clips
does NOT extend above the column label. See
Installing GC Columns
To column outlet
Column clip
(1 o'clock position)
Column clips
(3 o'clock position)
Figure
6.
2
37