Basic Settings; Changing Settings; List Of Settings; Changing The Time - Siemens CS656GB.1B Instruction Manual

Basic settings

en
QBasic settings
There are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

Changing settings

Press the On/Off button.
1.
Press the menu button.
2.
The operating modes menu opens.
Select the "Settings" operating mode.
3.
The first basic setting appears and can be changed
using the rotary selector.
Touch the ¿ arrow.
4.
Use the rotary selector to change the values.
5.
Use the ¿ arrow to switch to the next basic settings.
6.
Press the menu button to save.
7.
"Save" or "Discard" appears on the display.

List of settings

This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
Water hardness 0 (softened)
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Audible signal duration Short (30 s)
Medium (1 m)
Long (5 m)
Button tone Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
Display brightness Can be adjusted to one of five different
levels
Clock display Digital with date
Analogue
Off
Lighting On during operation
Off during operation
Childproof lock* Door lock + button lock
Button lock only
22
Operation after switching Main menu
on
Heating modes
Steaming
Dishes*
Night-time dimming Switched off
Switched on (display dimmed between 10
p.m. and 5.59 a.m.)
Brand name logo Display
Do not display
Fan run-on time Recommended
Minimum
Pull-out system Not retrofitted
Retrofitted
Sabbath mode Switched on
Switched off
Factory settings Restore
Do not restore
*) Included, depending on appliance model
Caution!
For shelves and single rails: "Not retrofitted" setting.
For sets of two or three rails: "Retrofitted" setting.
Changes to the language, button tone and
Note:
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------

Changing the time

You can change the time in the basic settings.
For example: Changing from summer to winter time.
Press the On/Off button.
1.
Press the menu button.
2.
The operating modes menu opens.
Touch "Settings".
3.
Use the ¿ arrow to switch to "Clock".
4.
Use the rotary selector to change the time.
5.
Press the menu button.
6.
"Save" or "Discard" appears on the display.
Power cut
Following a long power cut, the settings for initial use
are shown in the display.
Reset the language, time and date.