Table of Contents
Advertisement
en Cleaning and servicing
Basic setting
Brand logo
Dry microwave
Fan run-on
Telescopic rails
Sabbath mode
Home Connect
Factory setting
1
Factory setting (may vary according to model)
19 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
19.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance front
Surface
Suitable cleaning agents Information
Stainless steel
¡ Hot soapy water
¡ Special stainless steel
Plastic or painted
¡ Hot soapy water
surfaces
E.g. control panel
30
Selection
1
Display
Do not display
1
Switched on
1
Switched on
1
Recommended
Minimum
1
Retrofitted
Not retrofitted
Switched on
1
Switched off
Home Connect Settings
→ "Home Connect ",
Page 27
Reset
cleaning products
suitable for hot sur-
faces
18.2 Changing the basic settings
1.
Press
2.
Press
a The operating modes menu opens.
3.
Select the "Settings" operating mode.
a The first basic setting appears.
4.
Press
5.
Use the rotary selector to change the basic setting.
6.
Press
a The display shows the changes "Save" or "Discard".
7.
Press the required change.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
1.
Press
2.
Press "Discard".
a All your changes are discarded and not saved.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶
Never use oven cleaner in the cooking compartment
when it is still warm.
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Follow the instructions on cleaning the appliance.
→ "Cleaning the appliance", Page 32
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Do not use glass cleaner or a glass scraper.
To avoid permanent stains, remove any descaling agent that gets
onto the surface immediately.
.
.
to switch between the different settings.
.
.
Advertisement
Table of Contents
