Energetics CT 570 Instructions Manual page 8

STEP 1
Fasten Front Stabilizer (2) to the Base (1) using 2 x (4),
2 x (5), 2 x (6) and 2 x (7). Tighten with the spanner.
Note: It will help to place a piece of the polystyrene
packaging under the bike when assembling the
front stabilizer.
STEP 2
Fasten Front Stabilizer (2) to the Base (1) using 2 x (4), 2
x (5), 2 x (6) and 2 x (7). Tighten with the spanner.
Note: It will help to place a piece of the polystyrene
packaging under the bike when assembling the front
stabilizer.
STEP 3
Connect computer Upper Cable (14) to Computer
Lower Cable (15). A click can be felt when pushing
The two parts together. Insert the handlebar post
through the plastic cover and into the base and
attach it with 4 x (10), 4 x (6) and 4 x (5). Tighten
with the Allen key. Push plastic cover over the
Allen head bolt once tightened.
Step 4
Attach the Saddle Bracket (19A) to the Saddle Post holder
(18A).
Note: It may help to turn the saddle upside down.
Place it on a piece of plastic to protect it. Tighten
With the spanner.
Step 5
Insert the Saddle Post (16) into the Base. Align one of
the holes in the saddle post with the hole in the Base
and insert the Seat Knob (21) through the hole in the
Base into the hole in the Saddle Post. Tighten the Seat
Knob into the Base.
8