Table of Contents
Advertisement
Registering a handset
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
Important:
L If you have already deregistered the
handset, perform steps 2 and 3 only.
1
Handset:
K i {#}{1}{3}{0}
2
Base unit:
BB-GT1500
Press and hold {x} until the 4
indicator flashes in red.
BB-GT1520/BB-GT1522/BB-
GT1540
Press and hold {x} until the
registration tone sounds and the 4
indicator flashes in red.
L If all registered handsets start
ringing, stop ringing by pressing
the same button. Then repeat this
step.
L After the 4 indicator starts
flashing in red, the rest of the
procedure must be completed
within 90 seconds.
3
Handset:
[
4
Wait until "Enter Base PIN" is
displayed, then enter the base unit
PIN (default: "0000"), then press
M.
L If you forget your PIN, see page
91.
L When the handset has been
registered successfully, _ will
change to w. If the keytone is
turned on (page 52), a
confirmation tone will be heard.
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Registering an additional handset
See page 9 for information on the
available model. Start from step 2.
Deregistering a handset
Handset
1
K i {#}{1}{3}{1}
2
{3}{3}{5} i M
3
{V}/{^}: Select the handset you
want to cancel. i M
4
{V}/{^}: "Yes" i M
L When you cancel a different
handset than the one you are now
using, press {i} to exit.
Base unit
BB-GT1540
1
Press and hold {x} until the
registration tone sounds, and the 4
indicator flashes in red.
2
Press and hold the handset number
({1} - {6}) that you want to cancel
until a confirmation tone sounds.
Useful Information
77
Advertisement
Table of Contents
