Do you have a question about the KX-TG1611FX and is the answer not in the manual?
Questions and answers
Ahmed
February 23, 2025
I changed the batteries but the charging sign doesn't want to complete even though it has been on the charger for more than ten hours
1 comments:
Mr. Anderson
February 23, 2025
The battery level may not be displayed correctly after replacing the batteries. To fix this, place the handset on the base unit or charger and let it charge for at least 7 hours.
Page 2
Use only the supplied firmly. Wrong telephone line cord. (220-240 V AC, 50/60 Hz) To telephone line Use only the supplied Panasonic AC adaptor. DSL/ADSL filter* “Click” *DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service. KX-TG1711/KX-TG1712 Press plug firmly. “Click”...
TG161x_171xFX(e)for_7 language_QG.book Page 3 Monday, February 7, 2011 2:50 PM Connections Charger Press plug firmly. Hooks (220-240 V AC, 50/60 Hz) Use only the supplied Panasonic AC adaptor. Battery installation/Battery charging Charge for about 7 hours. Rechargeable Ni-MH ONLY Note: L USE ONLY Ni-MH batteries AAA (R03) size.
TG161x_171xFX(e)for_7 language_QG.book Page 4 Monday, February 7, 2011 2:50 PM Display language (Handset) (default: “English” (English)) 16 display languages are available. You can select L If you select a language you cannot read: {ic} s {j/OK} s {V} 4 times s {j/OK} 2 times s {r}: Select your desired language. s {j/OK} s {ic} Date and time (Handset) {j/OK}...
TG161x_171xFX(e)for_7 language_QG.book Page 5 Monday, February 7, 2011 2:50 PM Basic operations Making/Answering calls (Handset) Handset ringer volume {j/OK} {r}: “Ringer Setup” (Ringer setup) s {j/OK} {r}: “Volume” (Volume) s {j/OK} {r}: Select the desired volume. {j/OK} s {ic} Phonebook (Handset) Adding entries {r}: “New Entry”...
Page 6
TG161x_171xFX(e)for_7 language_QG.book Page 6 Monday, February 7, 2011 2:50 PM Frequently asked questions Question Cause/solution How long is the battery operating L When you are using fully-charged Ni-MH batteries (supplied time? batteries); In continuous use: 15 hours max. Not in use (standby): 170 hours max. L It is normal for batteries not to reach full capacity at the initial charge.
TG161x_171xFX(e)for_7 language_QG.book Page 7 Monday, February 7, 2011 2:50 PM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset {j/OK} {r}: “Setup”...
Page 8
TG161x_171xFX(e)for_7 language_QG.book Page 8 Monday, February 7, 2011 2:50 PM Optional service (Caller ID) If you subscribe to a Caller ID service, caller information will be displayed when a call is received, or when viewing missed calls. 012345...
Page 9
TG161x_171xFX(e)for_7 language_QG.book Page 9 Monday, February 7, 2011 2:50 PM Declaration of conformity form/Declaration of conformity form/ Declaration of conformity form The object of the declaration described above <A> is in conformity with the requirements of the following EU legislations <B> and harmonized standards <C>. The object of the declaration described above <A>...
Need help?
Do you have a question about the KX-TG1611FX and is the answer not in the manual?
Questions and answers
I changed the batteries but the charging sign doesn't want to complete even though it has been on the charger for more than ten hours
The battery level may not be displayed correctly after replacing the batteries. To fix this, place the handset on the base unit or charger and let it charge for at least 7 hours.
This answer is automatically generated