Network Camera (Kx-Hdv430 Only); Registering A Network Camera - Panasonic KX-HDV430 Operating Instructions Manual

3.10 Network Camera (KX-HDV430 only)

Registering Network Cameras allows you to use the phone to view those cameras' video feeds. You can
also control the camera's pan and tilt, zoom in, zoom out, etc.
If a Network Camera is associated with a phone number (Paging Number), you can call that number while
viewing the camera's video feed.
Also, if a Network Camera is associated with phone numbers (Linked Numbers), when you begin a
conversation, Network Camera viewer starts automatically and you can view the camera's video feed during
the conversation.
Note
•
To view a Network Camera's video feed from this unit, the Network Camera must be configured to use
H.264 as its video codec.
•
Depending on the camera model, some operations may not be available.
•
Calls with phone numbers that are associated with Network Cameras are available only as voice
calls.
•
For up-to-date information about Network Cameras that have been tested with this unit, refer to the
following web site:
https://panasonic.net/cns/pcc/support/sipphone/

3.10.1 Registering a Network Camera

You can register up to 16 Network Cameras connected to the network.
1.
In standby mode, tap
2.
Tap or , and then select "Network Camera".
3.
Tap "Camera Registration".
4.
Tap or , and then select the number you want to register.
5.
Enter the necessary information.
•
Name
Specify the Network Camera's name. You can enter up to 20 characters.
If you do not specify a name, one is automatically assigned.
•
Address
Specify the Network Camera's IP address (IPv4/IPv6) or host name (FQDN). You can enter up to 256
characters.
•
Port Number
Enter the Network Camera's port number (1–65535).
The default value is 80.
•
User ID
Enter the user ID to use when connecting to the Network Camera (max. 32 characters).
•
Password
Enter the password to use when connecting to the Network Camera (max. 32 characters).
•
Paging Number
Enter the name and phone number associated with the Network Camera (name: max. 24 characters,
phone number: max. 32 characters).
–
To select a number from the phone book: Tap
–
To select a number from the call history: Tap
Document Version: 2017-08
or , and then select "Basic Settings".
3.10 Network Camera (KX-HDV430 only)
.
.
Operating Instructions 81