Table of Contents
Advertisement
Answering System
Remote operation
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages.
The unit's voice guidance prompts you to
press certain dial keys to perform
different operations.
Important:
L In order to operate the answering
system remotely, you must first turn
on remote operation by setting a
remote code (page 64). This code
must be entered each time you
operate the answering system
remotely.
L To call the unit via the IP line from a
landline phone or mobile phone, you
need an additional phone number you
subscribed at www.joip.com other
than the joip number (page 4).
Turning remote operation on
N
A 3-digit remote code must be entered
when operating the answering system
remotely. This code prevents
unauthorised parties from listening to
your messages remotely. After you store
your remote code, remote operation is
possible. The default setting is "Off".
1
K i {#}{3}{0}{6}
2
To turn on remote operation, enter a
3-digit remote code. Enter the
desired 3-digit remote code.
L To turn off remote operation,
press {*}.
3
M i {i}
Note:
L If you have stored the remote code,
you can turn on the answering system
by calling the unit even when it is
64
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
turned off (page 60). This call may be
answered before the ring delay
feature of the night mode (page 59)
activates. You need to select "30
sec." for activating the ring delay
feature.
Using the answering system
remotely
1
Dial your phone number from a
touch tone phone.
2
After the greeting message starts,
enter your remote code (page 64).
L The unit plays back new
messages.
3
Control the unit using remote
commands (page 65).
4
When finished, hang up.
Note:
L When you press a key, press firmly.
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations. Operations are
presented by voice guidance in the
following order:
– Play back all messages
– Play back new messages
– Record your message
– Erase all messages
– Record your greeting message
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
Advertisement
Table of Contents
