Making/Answering Calls (Handset); Making Calls - Panasonic JOIP BB-GT1540E Operating Instructions Manual

Making/Answering Calls (Handset)

Making calls

Important:
L You can choose the landline or IP line
to make a call. Make sure to choose
the appropriate line for the phone
number.
L To call a Panasonic GLOBARANGE
phone, dial the A number
consisting of a # followed by 10 digits
(page 4).
Using the handset N
1
Dial the phone number.
L To correct a digit, press ^.
2
To make a landline call, press
{TEL}.
To make a A internet call, press
{IP}.
3
When you finish talking, press {i}
or place the handset on the base
unit or charger.
Note:
L l To make calls from your A
number to landline and mobile phone
numbers via your IP line, you need to
subscribe to the appropriate service at
www.joip.com
When calling, you may not hear
ringtones from your receiver/speaker
for more than 1 minute as the unit tries
to access the destination phone
number. This is normal, please wait.
L You can also make a call by pressing
] in step 2. The line set for line
selection mode is automatically
selected (page 29). When a A
number is dialled (page 3), the IP line
is selected.
L l If it takes some time to call the
number in step 2, press {#} to call it
immediately.
32
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Using the speakerphone
1
Dial the phone number, and press
{s}.
L The line set for line selection
mode is automatically selected
(page 29). When a A number
is dialled (page 3), the IP line is
selected.
L Speak alternately with the other
party.
2
When you finish talking, press {i}.
Note:
L Use the speakerphone in a quiet
environment.
L To switch to the receiver, press {s}.
Adjusting the receiver/speaker
volume
Push the joystick up or down while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 48 digits
max.). V (landline) and j (IP line)
indicate which line you made the call on.
1
{R}
2
{V}/{^}: Select the desired phone
number.
3
Press ] or {s}.
L The indicated line is selected.
L You can also select the line by
pressing {TEL} or {IP}.
L k If {s} is pressed and the
other party's line is engaged, the
unit will automatically redial
multiple times. The ringer
indicator flashes. To cancel,
press {i}.
Note:
L The caller's name is not stored in the
redial list when calling back a number
from the caller list.