Table of Contents
Advertisement
Preparation
Installation
Connecting to a landline and the Internet (IP line)
Connect the base unit to a broadband router or modem with a built-in router.
*1 Computer is not required for setup or making/answering internet calls.
TEL LAN
2
Telephone
line cord
1
Connect the supplied Ethernet cable until it clicks into the "LAN" port on the base
unit and unused Ethernet (LAN) port on your router or modem with a built-in
router.
2
Connect the supplied telephone line cord until it clicks into the "TEL" port on the
base unit and telephone line jack.
3
Connect the supplied AC adaptor to the base unit by pushing the plug firmly, then
plug the other end into the AC outlet.
L Use only the supplied Panasonic AC adaptor.
L The 4 indicator on the base unit lights in red for about 3 seconds (page 23).
18
AC adaptor
Ethernet cable
1
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Hook
To AC mains outlet
(220-240 V, 50 Hz)
3
Router
Computer
(Optional) *1
To telephone network
Press
plug firmly.
Internet
Cable or
DSL modem
Advertisement
Table of Contents
