Intercom Features Between Handsets - Panasonic JOIP BB-GT1540E Operating Instructions Manual

Intercom features
between handsets
Intercom calls
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while
talking on the intercom, the interrupt
tone sounds. To answer the call, press
{TEL} or {IP}. To turn the interrupt
tone off, see page 51.
L When paging, the paged handset
beeps for 1 minute.
Making an intercom call
1
{INT}
2
To page a handset, enter its
extension number ({1} – {6}).
L To stop paging, press {i}.
3
When you finish talking, press {i}.
Answering an intercom call
1
Press ] to answer the page.
2
When you finish talking, press {i}.
Note:
L The ringer volume for intercom calls
follows the higher volume level of the
2 lines (page 52).
L When the ringer volume is set to off for
both lines, the handset rings at a low
level for intercom calls.
Transferring calls, conference
calls
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
1
During an outside call, press {INT}
to put the call on hold.
2
To page a handset, enter its
extension number ({1} – {6}).
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {TEL} or {IP} to
return to the outside call.
4
To complete the transfer:
Press {i}.
L The outside call is being routed to
the handset.
To make a conference call:
Press w.
L To leave the conference, press
{i}. The other 2 parties can
continue the conversation.
L To put the outside call on hold,
press {a}. To resume the
conference, press w.
Answering a transferred call
Press ] to answer the page.
L After the paging party disconnects,
you can talk to the outside caller.
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without
pressing any buttons on the handset.
– listen to the sound in a room where
the handset is located.
Turning auto intercom on/off
"Off" (Default): Turns this feature off.
"On (Ringer On)": When an intercom
call is received, the handset rings 2
times then the speakerphone is
automatically turned on.
"On (Ringer Off)": When an
intercom call is received, the handset
does not ring and the speakerphone is
automatically turned on. This allows you
to easily monitor a baby's room, for
Intercom Features
69