Updating The Software; Registering/Deregistering A Handset/Desk Phone To The Kx-Tgp600 - Panasonic KX-TGP600 Operating Instructions Manual

Installation and Setup
4. Handset is safely hooked when it is in the cradle.

Updating the Software

When the base unit requests to update the handset/desk phone software, the handsets/desk phones
registered to the base unit will start their software update automatically.
Updating the Handset/Desk Phone Software
The following handsets/desk phones can update their own software, which can be downloaded through
the KX-TGP600 automatically:
– KX-TPA60
– KX-TPA65
– KX-UDT series (except for KX-UDT111)
After the base unit requests to start downloading the handset/desk phone software, you cannot enter any
keys.
The update is performed automatically. Follow the instructions on the LCD and wait until the update
finishes.
Note
R If you failed in the update, contact your administrator.
Registering/Deregistering a Handset/Desk Phone to the
KX-TGP600
Registering a Handset/Desk Phone to the KX-TGP600
You can register a handset/desk phone to up to 4 base units.
You can register a base unit to up to 8 handsets/desk phones (KX-TPA60/KX-TPA65/KX-UDT series).
There are 2 types of registration method.
R Handset/desk phone registration using the base unit
R Handset/desk phone registration using the handset/desk phone
The supplied handset/desk phone and base unit are preregistered. If for some reason the handset/desk
phone is not registered to the base unit (for example, the signal strength is out of range even when the
handset/desk phone is near the base unit), re-register the handset/desk phone.
Handset/desk phone registration using the base unit
When adding a new handset/desk phone:
85