Answering System Settings - Panasonic JOIP BB-GT1540E Operating Instructions Manual

Answering System
Answering system
settings
Number of rings N
You can change the number of times the
phone rings before the unit answers
calls. The default setting is "4 Rings".
*1
"Toll saver"
the 2nd ring when new messages have
been recorded, and on the 5th ring when
there are no new messages. If you call
your phone from outside to listen to new
messages (page 64), you will know that
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1
K i {#}{2}{1}{1}
2
{V}/{^}: Select the desired line.
3
{V}/{^}: Select the desired setting.
4
M i {i}
*1 l Depending on the condition of
your network connection, "Toll
saver" may not be used for the IP
line.
For Voice Mail service subscribers
Please note the following:
L To use the Voice Mail service provided
by your landline service provider/A
rather than the unit's answering
system, turn off the answering system
(page 60).
L To use this unit's answering system
rather than the Voice Mail service,
please contact your landline service
provider/A service provider to
deactivate your Voice Mail service.
If your service provider cannot do this:
– Set this unit's "Number of
Rings" setting so that this unit's
66
: The unit answers on
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
answering system answers calls
before the Voice Mail service does.
It is necessary to check the number
of rings required to activate the
Voice Mail service before changing
this setting.
– Change the number of rings of the
Voice Mail service so that the
answering system can answer the
call first. To do so, consult your
landline service provider/A
service provider.
Caller's recording time N
You can change the maximum message
recording time allotted to each caller.
The default setting is "3 Minutes".
1
K i {#}{3}{0}{5}
2
{V}/{^}: Select the desired line.
3
{V}/{^}: Select the desired setting.
4
M i {i}
Message alert N
You can select whether or not the
message indicator on the handset
flashes (slowly) when new messages
are recorded. The default setting is
"Off".
Important:
L If there are new Voice Mail messages
(page 68), the message indicator on
the handset also flashes slowly.
1
K i {#}{3}{4}{0}
2
{V}/{^}: Select the desired setting.
3
M i {i}
Note:
L While message alert feature is on, the
battery operating time is shortened
(page 22).