Panasonic digital cordless telephone system operating instructions (29 pages)
Summary of Contents for Panasonic BB-GT1500E
Page 1
L To clean the product, use a dry soft cloth. The outer surface of the product can be scratched by wiping or rubbing with a hard cloth. Setting up Base unit Use only the supplied Panasonic AC adaptor PQLV203E. “Click” Press plug firmly.
Page 2
“4 (Status) indicator” (page 6). Viewing the A text messages K i {#}{3}{6}{0} {V}/{^}: Select the desired item. i M Charger Confirm the Use only the supplied Panasonic AC adaptor charge indicator PQLV208E. is on. To AC mains outlet (220-240 V, 50 Hz) *1 BB-GT1522 For product assistance, visit www.globarange.com...
Operating tips Using the joystick The handset joystick can be used to navigate through menus and to select items shown on the display, by pushing it up {^}, down {V}, left {<}, or right {>}. Adjusting audio volume Push the joystick up {^} or down {V} repeatedly while talking.
Page 4
To make a landline call, press {TEL}. To make a A internet call, press {IP}. Note: L To call a Panasonic GLOBARANGE phone, dial the A number consisting of a # followed by 10 digits. Answering calls To answer the landline call, press ], {TEL} or {s}.
BB-GT1520/BB-GT1522/BB-GT1540 Answering system (Base unit) Auto answer on Press {IP/TEL} repeatedly until the display shows the desired line(s) (n and/or m). Press {s}. Auto answer off Press {s}. Recording your greeting Press {IP/TEL} repeatedly until the display message (max. 2 minutes) shows the desired line(s) (n and/or m).
Page 6
Quick troubleshooting 4 (Status) indicator Status Cause/solution Colour Light pattern Amber L The base unit’s IP address may conflict with the IP addresses of other devices on your local network if you have set the static IP address. We recommend using the automatic setup (default): 1.
L Disconnect the unit from the telephone line and connect a known working telephone. If the working telephone operates properly, contact Panasonic service personnel to have the unit repaired. If the working telephone does not operate properly, contact your landline service provider.
Page 8
Quick troubleshooting Handset shows: “No link to base. Move closer to base, try again.” Place the handset on the base unit, then check if the charge indicator is on. L Model shown is BB-GT1500. Unplug and then plug AC adaptor properly to both the The charge indicator is OFF.
Page 9
Registering a handset to base unit The supplied handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. Handset Press K, then press {#}{1}{3}{0}. Base unit BB-GT1500 Press and hold {x} until the 4 indicator flashes in red.
Page 10
L For customers within the Republic of Ireland, call 01529 0157 using the landline. For your phone’s functions or features, please contact Panasonic. Customer Care Centre L For customers within the UK: 0844 844 3898 L For customers within the Republic of Ireland: 01289 8333 L Visit our website for product information: www.panasonic.co.uk...