Registering A Handset - Panasonic BB-GT1500 Operating Instructions Manual

Registering a handset

The included handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
Important:
L If you have already deregistered the
handset, perform steps 2 and 3 only.
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
BB-GT1500
Press and hold {HANDSET
LOCATOR} until the STATUS
indicator flashes in red.
BB-GT1540
Press and hold {LOCATOR} until
the registration tone sounds and the
STATUS indicator flashes in red.
L If all registered handsets start
ringing, stop ringing by pressing
the same button. Then repeat this
step.
L After the STATUS indicator starts
flashing in red, the rest of the
procedure must be completed
within 90 seconds.
3
Handset:
{OKL}
L When the handset has been
registered successfully, _ will
change to w. If the key tone is
turned on (page 50), a
confirmation tone will be heard.
Registering an additional handset
See page 8 for information on the
available model. Start from step 2.
For product assistance, visit www.panasonic.com/help
For A assistance, visit www.joip.com
Deregistering a handset
Handset
1
{MENU} i {#}{1}{3}{1}
2
{3}{3}{5} i {OK}
3
{V}/{^}: Select the handset you
want to cancel. i {SELECT}
4
{V}/{^}: "Yes" i {SELECT}
L When you cancel a different
handset than the one you are now
using, press {OFF} to exit.
Base unit
BB-GT1540
1
Press and hold {LOCATOR} until
the registration tone sounds and the
STATUS indicator flashes in red.
2
Press and hold the handset number
({1} - {8}) that you want to cancel
until a confirmation tone sounds.
Useful Information
75